Search results

Well I found out that F12 fuse slot does get power with the Running lights. So I will pull the TIPM and solder on an Inline fuse to the PCB and out the Top of the Fuse section. The connect the wire to the Cab Lights. The Correct Pad for power is the side torward the center of the Truck. The...

They could change it to TRD for DUD or TRN for Neutered. Malodave

It needs a couple of Start/Stop Cycles to reset it properly. I will be pulling my TIPM soon to wire in my Cab Clearance Lights in the '21 1500 Laramie. There are no fuse contacts in F12 for the lights. Malodave

On my 2008 Big Horn I got the year of XM. I was still getting ADs and the signal would drop out for Trees and or Buildings. It was nice to not have to find a new FM station every 50 miles when traveling, but the drop outs killed being an enjoyable experience and having to pay for it. I got a...

I had a Viair 380c Compressor it took 23 minutes to fill my 9 Gallon tank from 0 to 200 PSI. I switched to a York 210 AC Compressor on my Hemi Engine and it would do the Same thing in 3 minutes at idle. I had to put a cold air kit on and remove the Air Box. The Brackets I designed and had laser...

I am going to be adding an Extra Sanden AC Compressor to my Ecodiesel to make On-Board Air for my Nathan Airchime K5LA Train Horns and Tool Ports. The air tanks on my 2008 Big Horn were from Airlift and mounted to the Frame Rails. I will be looking for a place for the Air Tank, but may end up...

An aftermarket Tail Light for my '21 1500 Laramie had the crimps in the connector pushed back that they were making intermitant contact for the Blind Spot Sensor. This was screwing with everything on that CANBUS. I had to take the connector apart to re-seat the crimps. This fixed the problem I...

How Many times do you all guess that I will be pulled over this Month?

If I could have ordered an 8' bed on my '21 Laramie CC, I would have done it. Malodave

There are less Jeeps affected. So they are trying to get them out of the way. RAM Owners get their letter in November from what I have read. Malodave

You can pull power from the 7 pin trailer hookup. get a Curt connector so you don't cut into the stock wiring. Malodave

First try to fix failed. I was going to replace the inside wiring harness with the stock one from the original tail light. After cutting into the back of the taillight housing and getting the aftermarket harness out,I started to trace the wires. They went to different connections on the PCBs...

When I was at GDE getting my PCM reflashed because of the Dealer "unflashing" it. They wanted $600 for one. I got mine for about $230 Shipped. It was hard to find on the seller's website, but a direct link from another member got me right to it. That is probably why they had some.. Malodave

The files are uploaded to the Discord Server (3D Printing) if you want to print your own. Malodave

I am running SunnyPilot's RAM Release C3. Just did a 2300 mile round trip with the Comma3 Driving 97% of the time. If you just ordered, you will be getting a Comma-3x. I do have a couple of 3x mirror mounts printed that mount it to the DASM cover instead of the Windshield. There is a video on...

The F11 fuse on my '21 Laramie 1500 does not have the contacts in the TIPM to install a fuse. I am going to try to get a wire soldered inside to an inline fuse to go to my CAB Lights. Malodave Edit: The F11 does get power with the running lights. The Correct contact is the one torward the...

I have only seen it when trying to charge something and it will not connect to the data lines of the USB. Malodave

I am running almost 20K per year. I just put 2300 miles on in the last week for a trip from NH to Illinois and back. My Comma 3 did 97% of the driving while I just watched the Road with my Hands off the Wheel and Feet off the Pedals. I have about 20K Miles with the Comma3 Driving the Truck...

On my '08 Big Horn I added a set of LED Strip Lights around the perimeter of the Hood tied into the hood switch. You could rebuild the engine under those LEDs. The stock light, you could almost check your Oil. I will do the same on my '21 Laramie but run leads to the battery with a switch to...