Search results

Absolutely...let me know if you have other questions or if you need a link.

Hi - thanks for asking, the DCX 130.3 and the infinity 5032cfx are great speakers. But both being 5.25” I felt I would not achieve the mid bass I would from a 6x9. Those two provide great mid-range – then my problem was; they are going to bring down my sound stage from being on my dash to in my...

No I didn't... I dont mind the position of it under the seat, I might make a removable hard cover that is breathable - a quick upgrade.

Yes, I used 8ga. with a 35 amp fuse from the battery. Very simple, you can easily thread it through the large grommet next to the steering column. Gently slice/cut and or poke a whole... place a flashlight in the engine bay so you can see where it comes out. Thread your gauge wire through...

I believe the speakers in the dash/Corner are ran I parallel with the front door speakers. I understand... keeping it simple, I had my neighbor listen to the system before and after. Playing the same music before and after... different types of music. He was very impressed with the...

Those are front speaker wires. Easy to access and I ran the wires back.

For the few folks who may just want to add amplifier.... Here are the pics of where I connected to get a line audio "IN" line to the amplifier. Again, No ANC issues what so ever. Drivers Side.... kick panel removal and the wires are located there, gently pull off the black OEM tape and go...

Few Pics of the Cervin Vega Amp/Speaker;

A few pics of the door speakers;

I used the 71-050 - ensured all the polarities was correct from the wires to the factory speakers. I did the old 9V battery test and then listed careful after installation prior to placing the door panel skins back on. The 71-050 - PERFECT.

I have the 6-speaker system in my RAM. NEEDED cleaner bass Went with a smaller footprint. My goal was to take up as little room as possible and improve on the current sound stage along with adding a little more bottom. So far no problems with this setup, NO Phase/Polarity Issues or ANC issues...

I believe Automatic Noise Cancelling ... if memory is not to foggy.

AMP Power boards BIG thanks to @Shaun.TFO - I got my boards in from him fast and I installed them two days ago..... LOVE them! Now I need to let the factor boards go. or dumb in the trash ;) I love these boards by AMP, I have a set on my wifes Jeep! Makes life easier and the look sharp...

Installed mines last Sunday, took about 30 minutes, Love the SOUND! AND combines with the Exhaust (B2 Fabrications Muffler) priceless :p(y)

Sorry I missed this, The side steps are factor... Not sure which ones they are, but I want them replaced with the Retractable AMP Side Step. The rear light strip I got from CJPonyparts. Link...

Very Nice... I am going to consider these. Thanls for posting pics

Gosh... I know me... I have to have it fixed. Yep OCD or just like to keep anything I spend my hard working/earned dollar on...looking nice... I just can not stand a dent. BUT thats just me LOL

Thanks

This was actually my second quick modification I did... Pulsar Edge and the Pedal Commander. Really can feel the difference, and its pretty simply to take off if I need to take it in for warranty work - 4 screws out, remove the Pulsar and replace Factor screws w/ground wire. Can speak to...

Hello, I purchased mines about 6 weeks ago. Have been enjoying it. Test drove my father in-laws Ford F250... it was nice for the most part. Test drove a 2015 Ram and then went to go take a "look" at a 2019.... it was love at first site (LOL) - did not mind at all trading in my Range...