Search results

As far as i know, there are only two types of halogen oem taillights in the 19-24 years. Chrome and black, the lenses are the same only the inner plastic is different. Your may be modified/tinted…or non oem.

Remove glass Remove four screws behind glass (Three fine thread and one course thread) Remove colored cap (4 press clips) remove screws holding plastic to metal bracket Separate and remove plastic halves Starting at the turn signal working toward the hinge and then over the top. There are tabs...

I added off road and performance pages. I want to add pitch and roll / gforce sensors. Anyone know if its possible to buy and install them?

I only changed the first one and mine worked fine

Yes trying to connect to calibrate and cant connect Also…using a tazer as a bypass Alway worked well so far. How do i connect while running? To callibrate?

Also soft keys are there but dont do anything

wires run. Alfa changes made. Cant seem to connect while engine is running. Am i using the wrong obd?

the cvpm is on the passenger side. I need the other end by the driver door. Can i plug into any of these? Does it matter which one?

The wire that jimmy07 makes that goes from the cvpm to the fuze box and the bcm Am i not using the correct terms? The only wire thats not a fakra wire What do the two ends connect to? One is a fuze and one goes to some port on the bcm i think…

What port do i plug the from cvpm wire into the bcm? What fuze do i tap?

I have a set i was gonna put lights into but since then i have given up. I will make you a good deal if you want them.

Update?

I did the 2019 DT. I bought the repin harness from Jimmy07. I don’t even know what to check or where to start troubleshooting. The only other people with this issue had ancient software versions and they updated to 39.7. But I’m already on 40.1. Can I go backwards?

anyone have any suggestions? software version says pr-40.1.0

Most functions work. Did the swap…followed instructions in post #308. Only dif was the model menu is different now, But… Volume knob, tune knob, mute, and screen off do nothing….

New radio and bezel

Thanks, thats what i wanted to know. I have all the parts i need for the mirrors and backup swap. I will do the front cam in the spring….

What does that mean? Will the three cameras show on the screen when i am in reverse?

will the system work with only three cameras? I am doing headlights next spring and dont want to tear into the front end twice… Can i do the rear and sides only for now?