Search results

Does anyone else have this problem? I already have a blind spot but I disconnected this connector because I'm trying to add the 115v ac power inverter in the bed but then I got these codes that I can't erase with AlfaOBD or CDA6.

So don't even try to buy the other cameras if the mirror can't show the button for the split cameras.

I enabled them with alpha without ECU verification but nothing came out. I'm going to upgrade my BCM to 2023 to see if I can enable them without having to check the ECU.

I think Jimmy said your radio was a trial version that you can't upgrade to a newer version

Still available

A friend helped me flash my 2020 bcm to 2021 with cda6 and the mirror needs the module for the other cameras, which I want to try to do too. The only thing I changed was the camera of the third stop light from the 2500 lamp to the 1500 because they are different part numbers, so I took a...

I installed a 3.0 digital mirror by flashing my bcm to 2021

I imagine the VIN has to be from an imported RAM because I tried to put in a US one and nothing came out.

I'm looking for them too

I know this is for surround view but would it be possible to just add the forward facing camera for off road

You were right, I found it but in 2022 the bcm 2023 does not show anything to change or enable the cameras

the ecu box is not checked but when pressing 2023 it says my 2021

My BCM is 2021. I wonder if a 2023 will have that option in the BCM.

The 3.0 mirror works on a 1500 but I don't know what else needs to be activated in AlfaOBD for the side and trailer cameras. I had to replace the third stop light camera with the one from a 2500 23-24 and place it where the other one was.

Does anyone have extra pins for the aux camera connector on uc5?

Has anyone installed the digital mirror 3.0 that you can have up to 4 cameras?

If it is chrome I would recommend a wrap because the paint would come off over time.

You are right. I tried to do it on a Jeep Grand Cherokee L and it also has the same cam bus.