Search results

I just posted in your spring thread, Sorry for keep jumping form one to the other :) " Didn't realize from other thread you were asking about the rear shocks :) Do you have measurements of your stock rear shocks extended and compressed lenght ? From your other thread you're runing Fox 2.5...

Also do you have pictures of how your rear trackbar angle looks like before/after the clayton springs ?

Didn't realize from other thread you were asking about the rear shocks :) Do you have measurements of your stock rear shocks extended and compressed lenght ? From your other thread you're runing Fox 2.5 883-26-079 Those are 25.6" extended Extended 25.650 Compressed 16.850 At ride...

Form accutune https://accutuneoffroad.com/oem-front-coilover-shock-setup/ How to Measure your coilovers With your vehicle at ride height on level ground, measure from the top of the “top cap” to the center of the lower shock bolt. This is the shock length at ride height with the vehicle weight...

Good news. Glad to know they worked for you. I can't remove the grin in my face with those coils especially when the time to add camping gear comes into place. I'm running 29" extended King 2.5 piggyback shocks I had custom made from King to better utilize the Clayton 2.5" coil spring extended...

Leave that alone. it'll get much more fun after a while so things like that won't bother you. If it helps that's really nothing to worry about. Lol honestly.

Ask Ben if they will still honor a free revalving :) otherwise it'll cost you $125 per shock. Accutune is local and cost the same so you can save shipping dropping them off with them if that's the route you'll have to take.

I had the opposite effect in my Kings, the OE specs were too soft, i have a 4th gen RAM so the valving may be different. Accutune did their flutter valving and i ask them to tune so they will resist bigger potholes, and also at low speed washboards they were a little rough so i had to speed up...

Did you get those Clayton's yet? Also do you have a picture showing your rear trackbar angle with your factory ORP springs?

It's not tape. Its vinyl tube from Lowes. Old trick i used before to calm progressive springs in my BMW and Stangs :) Untitled by RAM RSM, on Flickr I used a razor to prep them :), and they'll literally spin in inside the coil, (just lift the rear, let the axel droop enough for the coils to...

I got them straight from Clayton as I told them what I was trying to do with their coils and my truck And they told me if they didn’t fit they would take them back no questions asked and they will also waived the restocking fee. They have a great reputation in the Jeep community. That’s why I’m...

Considering the same Icon 2.5 Coilovers for the 4th gen are advertised for the 5th gen i'll say they should be same front lower shock mounts. But i'll let the 5th gen dudes answer that one as i'm still learning about the new truck suspension.

Since you guys can run 4th gen 1500 rear coils springs you could try Clayton 2.5" rear coils, part# COR-1510251 These are springs designed for the 2020 Jeep Gladiator. I'm running them in my RAM 1500 truck because our aftermarket sucks when it comes to mods for overlanding/offroad so i'm always...

can you measure the shocks from the shoulder of the first bushing until the center of the eyelet? Thanks a lot.

Can you post a pic from the rear of the truck showing the level of the trackbar ? I'd like to see how your stock rear TB looks like without a lifted rear.

So the truck in the article is the same as the OP? they say Carli rear spring is 1.25" over stock 5th gen, but the OP is asking what to do to help with weight ??? that means the Carli spring are softer than stock ? I know Carli springs are softer than the normal springs in the 4th gen and in...

Are these the ones listed from Eibach website as E30-27-011-02-02 ? I don't see the exact part# you have in the springs listed in the Eibach website, so i'm asusming those are the ones that come as E30-27-011-02-02 ? Do you have the shocks E60-27-011-03-01 correct? can you measure extended and...

Icon doesn't list chit for specs. They've been doing the same for years. Only thing i know about the Icon coil springs is that they have a 19.25" free length. Don't know about the rear coil springs in the new Rebel. Can you take one of yours out and measure ? This is the only thing Icon list in...

So what did you do in the back ? Carli coil springs ? Did you keep your factory 5th gen springs ? if so can you measure their free length ? how much weight are you adding in the back and how bad is the sagging? I know my factory springs sucked in the cargo department. My truck is 450lbs heavier...

Icon coils should give you a little lift in the back (about 1") and they'll ride as good as stock cause you'll be riding pretty much in their 1st rate without a load and their spring rates are softer than stock in that one. UCA's will also improve your suspension cycling up and down in the...