Search results

That is quite a bit of rake. Anymore pics?

I have not come across anyone on this forum having any issues with the stock uca’s failing due to the 2.5 spacer. At the end of the day it’s preference and how hard you drive your truck. If mines fail I will definitely post it.

2.5” motofab spacer with stock uca, 305/45/22. 22x12

I replaced the ls+ low beam to highlight revolution low beam led. The ls+ is way too bright and blinding.

This if You are going to pay $300 for universal uca’S then you might as well go with a 6-9” lift. Changing uca’s On a $60 2.5” spacer makes no sense.

2” makes a difference. It’s cheap and easy to install.

I am not sure if this 22x12 set up will work with the 2” spacer. I would expect some rubbing. Currently At full turn it is really close. I have only seen 20’s installed with the 2” spacer. Nitro 420 is a nice thread design

It sticks out quite a bit. I do no off-roading so these street tires work best for me. The level is only a simple spacer and it doesn’t affect the comfort of the drive or handling. IMO. Doowork has a YouTube channel with videos on the same set up. He has the TIS off-road wheels which are nice...

The Motofab spacers work for both 2wd and 4wd. It’s pretty much the same set up for non airbag and non off road packages

The Motofab spacers will fit the 2wd’s. Purchase with confidence.

The Max Steel is nice!!! I should have went that route. Since you have a lot of Chrome it is best to do all Chrome or black face with Chrome lip.

Yea with some 305/40/22 tires.

Thanks for your comment. This set up will not fit without lifting the front. I have the 2.5 motofab spacer installed and removed the tiny front splash guards. I have no rubbing issues.

Your good. There’s not much strain on the UCA’s on non ORP big horns.

Buy the bolt on straight pipe from B2 Fab. Easy install. Sounds nice no drone in my cabin.

I pulled the trigger yesterday. I’ll let you know once I install these new ones.

Fade the volume to the rear a few notches and you will be fine.

Your best bet is to measure it before purchasing. I have the 2.5 motofab on a 4x4 bighorn and it’s as close as it will get to being level.