Search results

How are things working out? I recently did the Oem led upgrade with Jimmy's harness. At first I got a right turn signal, cleared that and only getting a left turn signal out message.

Yes, they work great. Just make sure to retorque after 100 miles.

I did the pro lift kit from Eibach and the rear springs were 1” lift. I’m not sure of the actual lift height on the fronts. It raised my fronts 2 1/2” and rear 1”. I still have about 1/2” of rake, you can go level though by going up to the next ring. I also installed the new front sway bar end...

Mine was level on second notch. But I then lowered it to the lowest notch to get about a half an inch rake. I experienced a slight wobble in 4x4 which is why I lowered mine back down.

Sorry, I didn’t know that. Thanks for correcting me.

QTY Item # Item Description 1 68312566AB Lift-Gate Lamp, Right 1 68312567AB Lift-Gate Lamp, Left 1 68488851AB Jumper Wiring, Left 1 68488862AA Jumper Wiring, Right This is what I ordered from Bam wholesale. It took a little over a week to get.

It will say that they don’t fit because your truck didn’t come that way from factory if your plugging your VIN in. You have to order the numbers that terps suggested. Then all you have to do is program. It’s a lot cleaner way of doing it. Yes, you have to remove old harness and put those new...

I just want to thank swing4terps and Duane for your help. Installed my led bed lights with the harness terps suggested and they work flawless, just like from factory. No running wires up to cab, just plug and program. Thanks!!

Ok, thanks. Mine is not the off road package, but does have it in the center cluster. I’ll have to see if mines up to date.

Mine has it in the center, but not the head unit. How do you get them?

It does, thanks. I was looking on BAM parts though and there is four different part numbers for each side.

Does the jumper wire harness work on the halogen taillights?

You’re welcome

I just got done doing mine. Part #’s are 68533274AB, and 68533275AB. You will also need a conversion harness. I got mine from Retroshop.

No, they didn’t give a max tire size. I’m considering 275/65 or 285/65r20 if that helps you at all

Jack her up and let the front hang and see if they touch. The only way I found mine was when I rotated the tires.

Welcome

Yes, that’s what I was talking about. Sorry I didn’t help, but wish you luck.

Could it be that your UCA are contacting your spring at full droop? I had an issue with my Eibach kit. The bottom spring hat needs clocked a certain way. The notch on the drivers side needs to face towards the back and the passenger side towards the front.

Nice write up, I love my Eibach kit.