Search results

@Atrophaeus .... I'm in MASS... but willing to help in any way.... this mod is actually very doable for any skill level... -=FM45=-

Per your illustration ... A = pos 1-2-5-6 1-6 plug - OUT towards wheel well 2-5 plug - IN towards center of truck B = pos 3-4 plug - UP Have no info on any 'Force' calibration.. -=FM45=-

Sorry I should have mentioned... I have the 8.4 non nav but this mod should work on any 8.4 or 12.1 ... 3 changes with Alfa is all that it takes to go from base6 to alpine9 once the hardware is in place... -=FM45=-

Until I get the how-to together... anyone who is interested in this mod, you can get a jump start by collecting the needed hardware... These can be ordered new or they can be sourced thru eBay, CL, this FORUM, take outs from local radio shops, and etc. Parts needed to mod the 5.7 Base 6 w/ANC...

If you use the windows version it will show the change(s) you made at the end of your config file upon exiting the software... well at least mine does.. :) -=FM45=-

Use this and you'll be good... Lower grille trim -open grid style- 68334531AD -=FM45=-

My Bighorn 'did' come with the base 6 spkr w/anc non Nav... the sound is Ok for what it is.... But at present I am modding my system to the Factory Alpine 9... I have it half complete and it doesn't sound too bad... I wanted to keep it simple and clean... don't need my ears to bleed---been there...

@ sport--- If you're referring to my write-up... follow my how-to but just substitute/add-on the parts required for the semi-auto... it's just a couple of extra parts and steps.. If you need more just pm me... -=FM45=-

here-- https://www.mycartrim.com/years/2019/ram/1500-(crew-cab)/venom-s-body-side-moldings-2019-ram-1500-crew-cab perfect fit and color match ... -=FM45=-

This is the part number for connector-- 68316041AA -=FM45=-

I am starting another Mod. Before I can move on it, I am asking for any member that has the factory Alpine system to post pic(s) of the three connectors from under the drivers seat. I am looking for pics for the two gray plugs and the one white plug from the wire side... Appreciate any and...

I think this is it... -=FM45=-

Hope this helps--- edit--- just re-read your issue... --- look for the thread about adding passive entry, there is info there on removing all and getting to the 'inside' door skin.. -=FM45=-

here--- https://5thgenrams.com/community/threads/lack-of-12v-outlets-and-needing-bed-cover.26978/#post-377739 -=FM45=-

Manny-- rear valance

@G07... those 'switches' shown are controlled by the CAN of the truck... the BCM does all the heavy stuff not the switch bank... they act like the keyboard of your computer - a pulse is sent to the BCM and then the command is processed ... -=FM45=-

All the info provided was for the 1500 DT -- give me a little to dig up info on the 2500 -=FM45=-

Great news--- glad all is well--- now onto the next mod ;) -=FM45=-

here-- https://5thgenrams.com/community/threads/colored-ambient-lighting-dash-and-doors.14274/page-5 -=FM45=-

Vin56--- just another thought... under Alfa, what is the 'Park Assist Tuning Set' value... that may need a change.. off hand it might need to be ' 10 Channel/BUX Rear Only/Summit' -- but don't hold me to it -- I think you're close... edit-- just did some more digging... before you change above...