Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
Yes, I added it, to the of the right of the USB jacks. I THINK I tapped into the wire that powers the 12V outlet at the top of the IP. I MAY have run a new wire from the Power Distribution Center. I didn't document it, and I can't remember. I can look tomorrow to see how I ran it. I also...
I did receive and wire the clockspring. Heated/vented seats and heated steering wheel work. I did not need to flash anything. After I installed all the wires the hard buttons for heat/vent worked. I don't have soft buttons (without flashing); but I think I can live the rest of my life with...
The donor seat I bought has heater pads. I have bought the vent bags and blower motors--but I don't know how to install the bags. (I posted pictures earlier). I think the bags install between the "hard" foam and the about 1/2" thick open cell foam. Do you know if I can peel the open cell...
I have not gotten that far. My truck does not have the harnesses that go to the gray (10) and black (16) connectors . So far, I haven't found anyone who can build these harnesses. I've not even found wiring diagrams for them. I have pinouts; but don't where the wires route and connect to...
I have these 2 harnesses available for Rear Heated (no Vent) Seats. 2019-up Ram Mopar 68311400AE Wiring-Rear Seat for Heated Rear Seat | eBay 2019-up Ram Wiring-Rear Seat for Heated Rear Seat Mopar 68294531AE | eBay
This is one of the diagrams I made and posted on another thread. It was Pin 25 on the Yellow Passenger Seat connector, that I highlighted in Red, indicating that the wire was present in my truck. But, as I posted, this is the one that is not continuous to the Power Distribution Center. BTW, I...
While the Fused B+ (I don't have my diagrams handy), I think the 2.0 MM RD for the seat motors was present in the Yellow connector under the passenger seat, I discovered from Jimmy07 that the wire was not continuous to the Power Distribution Center. Follow the harness from the Yellow Seat...
Fiat was really sneaky on this, at least on my truck 2022 BH with Level 1 EQ. While the Fused B+ (I don't have my diagrams handy), I think the 2.0 MM RD for the seat motors was present in the Yellow connector under the passenger seat, I discovered from Jimmy07 that the wire was not continuous...
You should be able to find the connectors without removing the seat. There are slits (maybe Ts) in the carpet for thses connectors--whether you have them or not.
I bought and installed the harnesses that mount to the seat and connect the heater pads and fans. Also bought and installed the console harness and heat/vent switches that mount in the rear of the console. But, I can't find the body harnesses that the seat harnesses would plug into. Another...
I see the connectorrepairkit link didn't populate. Just enter 30 in Number of Cavities field. It will show you repair kit, and individual pin description, info. Seems there's only one connector with 30.
I bought donor IP and Body (Cabin) harnesses and 'robbed' wires with pins from them. But this should give you repair kit, or individual pin descriptions for the yellow connector. The yellow connectors are XY420A (sure) and XY410A (as I remember)--anyway both yellow connectors use the same pin...
From what I've read, pretty good chance on the 2500, 4.5 Gen. On my truck, 2022 1500 BH with Level 1 Equipment Group, I had to add around 30 wires for heat/vent seats and heated steering wheel.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.