Search results

The spats may vary depending on your year and trim and Flare vs Non-flare. Honestly, I see hundreds of these trucks a week and depending on the mood of the plant, or inventory, theyll change up small fasteners and what not just to keep the line in the plant moving.

I highly doubt you can do this with the MFTG, the additional space taken up by the frame for the tailgate wouldnt allow for it. OPT7 with amber lights

Heres a better Video Mine are not perfectly spaced, but close enough. I have the clamps/clips 5-6" from each end, and then about 15" in from those. Heres what Mine looks like. If this was going to be long term, I would swap out the end, but since I plan on making an actual harness, this...

Just checked 3 trucks. They are all screws

Dealers system shows Screw part number 06510175AA Spring Nut 06509500AA

Looks like all the trucks in here are running factory Mopar boards

If you want, i should be able to pull the actual part number when I get into work tomorrow. It should be the screw Mike provided, but make sure you still have the spring nut. Should still be attached to the liner.

Forgive the um mess:ROFLMAO: Pulled the tailgate and dropped the Spare for extra room. I think most people used self tappers, but I ended up tapping the holes slightly larger on the 4 clamps/brackets and used #8-32 1" stainless steal screw with an oversized washer and locking washer on the...

I ordered the 60" with Amber. I did not order the module as I didnt see anyone with the module.

We are on the same page. The jumper cable would just be tie in so your not modifying the factory harness. I already priced out harness parts(connectors, pins, wires), once the bar gets delivered, ill probably order the harness parts and attempt to build my own jumper.

My thought for that was for a jumper harness that plugs into the factory harness and then into the taillight, then you feed the lightbar off the jumper. That way if you need to have it serviced or trade in or whatever the case may be, you unplug the jumper and then reconnect the factory harness...

This is actually normal for these trucks. Ive seen hundreds of these trucks, since they started building them and i would say they all have this to a varying degree

Thank you

Couple questions regarding installs. Has anyone attempted to make a jumper harness to feed off the factory taillight harness to power/control the lightbar to eliminate the delay? Ive seem a couple people say they are using self tappers to screw to the plastic, however, how stable is the...

Hey all, New to this forum. Found it when looking for "technical/installation" info This is my 6th Dodge Truck, 4th Ram 2016 Dakota 2018 Dakota 2010 Ram Quad Cab Sport 2016 Ram Crew Cab Bighorn 2018 Ram Quad Cab Bighorn 2020 Ram Crew Cab Bighorn Night Edition. No big mods/changes. Keeping...