Search results

I put on my backflip mx4 from my 13 on my 19!.fit fine.

I did mine I used my garage door. I pulled up and marked a spot for the wheels and then put masking taoe where they shined before the level. Then after adjusted to the same marks after.

Some have reported the drain between the bed and cab not being properly installed letting all the water in. I just checked mine and they are good. Just finally getting some rain here after about 6 months so this thread reminded me to check the drain tubes.

So you put the spacer on with the Mopar lift to take out the rake that the Mopar lift still had right?

X2 R3 It's great! Ive always bought Escort Passports etc, this is cheaper and better

The left of center vent will not go below 52-54 on mine no matter what, its got to be a software/blend door issue I believe. The passenger side will hit mid to low 40's. No response from RAM anywere I've seen the people saying theirs is cold as ice....... well.. I doubt that.

My 13’ was Maximum Steel I really liked it. Now I have granite crystal metallic. I think the Max Steel did not show dust as much as the Granite. It did look blue in the sunlight and changed with the light. White or silver are going to be your best colors for not showing dirt and dust.

As much as I would like the bed step, almost $300 seems kinda high for what it is.

Ya, it doesn’t work, unfortunately. I think you won’t be able to ever do that without a separate device like a lockpick.

I use a blower or just a quick spin around the block before drying works well. The grrille and bumper also hold water too.

Yes, they are great. A lot better than the previous. No complaints here.

How did you run the wire to the bed?

That front end is the worst thing I’ve ever seen. Cheap interior looks dated. I drove in a friends 18’ GMC 3500 the other day, couldn’t help look at that crap interior and think how nice my Ram is in comparison. I’m pretty sure this. Interior won’t last over 2years until they redesign it.

Ugly, cheap, POS!

Mine does it and my 13’ did it as well.

On my 4th gen I used the Air Lift air bags, they go in between the rear coils. They also are low pressure max is 24psi. They worked great for towing with a Andersen sway hitch. I don’t think they are out for the 19’ and the 18’ probably would work but. Not sure.

I stuck a nice led light on the cover where these lights go. It’s plenty bright and for the few times I might need it I think it’s fine. I can handle reaching in and turning it on and off manually. Once again, it’s hard to believe they did nt wire the trucks for these or include them as...

Part number was the same as original on the fronts at the time mine were done. My rotors were lightly resurfaced.

It's not just Ram trucks, its other manufacturers too. I advise on turning the automatic braking off, just leave the alert on. I've seen it on Hondas too. self driving, self braking cars are not what I want to see. It relies on radar to stop you, if it picks up something on the radar, it can...

I thought it looked tall.