Search results

That looks really good!

the final piece showed up yesterday

they do not come greased. will have to use a Grease gun once installed to fill the boots. they were $499 shipped. very beefy

do you have any pics of the zone uca installed? haven't seen many of those.

you can change your own oil about 3 times for the price of 150$. full synthetic and mopar oil filter. im on my 3rd self done oil change, usually runs 50-60$ depending on oil deals at the time. it takes about 30-40 minutes instead of spending hours at a dealership too which is why i mainly do it.

was looking to spend less than 50k couldn't get any dealers in that price so found a used 2020 rebel with 8k miles from a carmax out of state and bought that one had it shipped to my local carmax. price was 47,998

parts have arrived. wheels should be here Monday. 18x9 -12 methods with 35x12.5 trail grapplers.

those ucas will work for you.

you have to make 1 cut. used a sawzall with a metal cutting blade took about 30 seconds to cut. the other side is just 2 bolts on the flange. It was extremely easy. Definitely wear glasses while cutting.

i have pass through sockets. i assume the 35 lb rating is based on having the spring compressed from what I've read and from what zone says yes. there's a thread here somewhere with someone running them

Just had a set of 6112s arrive. Had them assembled by bilsteinlifts and noticed there's a slight slant to the top hats. Is this normal?

keep going till the nut stops right? don't wana strip it.

i can do that without compressing the spring correct? both top hats look a little angled maybe the nut isn't fully seated

6112s just arrived! wheels and tires should be here Friday. will be adding a 1/2in motofab spacer on top of these as well.

i almost went with fox but it would have cost about 3500 total. with the bilsteins and zone uca i ended up only spending about $1900. the zones were 499 and I've had them on my previous 2014 ram and loved them, they're very well built and beefy

well, took off the 5160s reservoir bracket to flip it and the bracket has grooves inside that make it so if it's flipped the "bilstein" Branding will be upside down so i put it back to normal, just have to deal with not having the branding exposed on the right side but no big deal. Have read...

i went through bilstein lifts and for an extra $199 chose to have them assemble them as a complete coilover. this way i can install them myself without using or renting a spring compressor and also allowing me to sell my factory bilsteins as a complete assembly. but yes that's the going price on...

ordered 2 rear left shocks due to the rights being back ordered till August. the only difference is the reservoir bracket which looks removable so il just flip it around so the branding is on the correct side. 6112s should be here later this week already assembled on clip#8

went with solo mr300 and am really happy with it. install was really easy. All my buddies think it's badass too 😁

looks like il be ordering 2 left shocks i guess. bilsteinlifts keeps telling me 1 more week for about 2 months.