Search results

So you are now at 34.2 Is that correct?

The fobs work because the light comes on. The truck is seeing the chip in the fob, thats why the truck starts and proximity entry works. That is a separate function in the Fob from the buttons. One concern I do have is he has a 12 radio installed after the fact which has the door lock control...

Just make sure to check the battery in the Fobs before jumping to a conclusion. Also check and make sure there is not a setting in the radio to enable and disable the fobs. Try disconnecting the vehicle battery for 5 minutes. Lastly if nothing else works, you need to go back to dealer and have...

Then WheelerNation needs to make that clear to the service writer and the tech. Just do the update and move on. It is human nature for a tech to all of a sudden see multiple active codes and think something went sideways. What you do not understand is everything on Witech is recorded live on the...

That is an excellent question. They are just entering the radio module and changing the screen configuration and some internal software to allow the split screen. I think everthing that is in the 8.4 Nav is the same that is in the 12 inch. Someone must have figured out a hack via a token key to...

The problem without the handles installed is the tech will wind up with multiple active error codes after he does the vehicle restore. He may then think he really messed up. The best idea is probably to tell the tech to just do it and ship the truck. What he needs is a tech who really knows what...

The problem without the hardware installed is the tech will see a lot of fault codes after he does that. Probably should have installed the handles. Even at that he will see fault codes complaining about the tailgate antenna. In fact it will still update your bcm without the hardware, but save...

You have the correct module number for 8.4 Nav. It does not work with 12 inch

That is not what I mean. You can modify the door harness pretty easily. And save yourself the cost of a complete harness for both doors. You only need too add 2 wires to the door harness with the correct wire ends, twisted pair wire all soldered, heat shrunk and properly routed. Too many guys I...

Did you get a quote for this. Might be cheaper to trade in. It could be $1200.00 parts and labor at a dealer to do this. Then you need to hope you don't get an inexperienced kid to do this. To do this correctly at a dealer level would require 2 door handles, 2 caps, 2 door wiring harnesses, the...

Think about it. The truck was put together and engineered by professionals. FCA has a built in liabilty for what they designed and manufactured. The end user who is probably not a pro, probably installs his own wiring harness, install all the factory handles and then if something goes wrong, FCA...

Someone is not telling you the exact truth. The zone rep probably just does not want to add it. Possible liability issue from their point of view. That would be their excuse anyway.

Until you know you can get the sales code added, do not buy anything. The parts can be installed after the sales code is added

Another guy who is on the outside edge for the recall. If you are in 3/36 you might be eligible for a regular update depending on your vin. The dealer should run your vin on the dealer uconnect site and see if there is an update. If you are out of 3/36, need to hope for an OTA or possbly pay for...

What is your application version

Last 8 of you Vin. Let me see if I can look it up

You are at KR20.12. That is why they won't update it under the recall. If the app version is at KR20.16 or lower, they won't do it because they fear they won't get paid under warranty. But that is only for the recall. If you are still in 3/36 they should update it under warranty. Or if you have...

You need to look at the application version, not the software version. What does the application version say. Either take a picture or type it out. It probably starts with USA.

I suspect you did not realize a Certified Pre Owned vehicle usually comes with a 8/80 powertrain warranty from Mopar, if it is certified FCA. So you needed to buy a wrap around plan which did not need to cover powertrain. up to that point My guess is that is the reason for the difference in...

The best bet is hoping a Mopar kit comes out. If done properly you need 2 handles, caps, 2 door wiring overlay. Wiring for the tailgate area and a rear expensive antenna. This could be an expensive kit. But if it does become available, that would allow for the code to be added easily.