Search results

That’s the exact one I used for my front camera. Seems to be a good choice. Sent from my iPad using Tapatalk

The first link is the exact one I have. The only difference, as I said, was I had a friend mine swap out the green LEDs with all clear or white ones. I think the second one is the exact same unit with different LEDs. Either will work. They are all 6 relay units and will work fine. Really just...

The switch kit I ordered, from Amazon, has a relay for each switch. This handle the higher wattage of lights and what not. Probably not needed to send the signal wire and power a camera but it never hurts. What switches are you using? Usually that dictates the back light color then the label...

My understanding is the uConnect will only accept one analog camera input on the back. That’s why I used the switcher. So, I think your logic seems correct. I will say this, if you go with the same switcher I did then there are some things to be aware of. The directions are very misleading...

Sorry. I didn’t see that when I responded. Sent from my iPad using Tapatalk

That is true. There is only one analog input for a camera on the back of the 12" uConnect that I am aware of. That’s where the switcher comes in. My switcher output goes into the back of the radio. The cargo cam is on input one. It’s always powered when the ignition is on. When I want the front...

Yes, both cameras I am using are analog and require power.

Mine was pins 21 and 22 for the RCA dongle into the UConnect. The switcher I installed allows up to four rca ins and just the one main output. So the output went directly into the dongle connected to Uconnect and the two cameras rcas went into the switcher. The system defaults to cargo cam and...

This brings up a question that I have that is related to this. Does anyone know if it is possible to have the dome light, in the rear, come on when I open my doors but not have the map lights up front come on? I have a 2020 rebel and I have a switch between the map lights that is either...

Couple of things. The soft key can take a while to display and also it will be greyed out in certain instances if polarity is wrong. Hope that helps. Mine took several hours to come back on when installing it in the Uconnect.

Sure, the switcher I used is this one from Amazon. Iy allows 4 inputs and is triggered by either a positive or negative voltage feed to switch cameras. As far as the switch panel. It is also from Amazon but has been heavily modified. When I got it, I had a friend replace the internal LED's...

Thanks to all the info here I was able to install a front camera today but I did it a little different. I actually installed a cargo cam, used AlphaOBD to turn on the soft key. Then I installed a video switcher and a front cam. Now when I select cargo cam it shows and when I want the front cam I...