Search results

Don't quote me on this but I would think it has to do with the position/projection of the sonar pulse.

Yes post 161 Jimmy07 covers where to tap the wires. If you don't turn the mirrors present on with Alfaobd you will get the tone just no light.

I don't understand what you are asking in this question

I had the correct harnes at taillights but they didn't go into cab had to run my wire inside the cab.

I've done it 3 times this way now I did it first with the the original mirrors then I bought a set of mirrors with blindspot and cameras. Which I then had to do this process over again on Both sets mirrors to switch the caps. With this method you're not apply enough pressure to break the mirror.

My mirrors arrived a day early. I installed them and reprogrammed the mirrors present with AlfaObd everything works as it should no codes.

I noticed something else the past 2 mornings I’ve used remote start and the blind spot doesn’t turn on automatically with remote start I have to turn it off on my screen and the turn it back on to get the audio beeping. When starting the truck normally the blind spot turns on as it should.

I purchased my radio module new also software version is 18.27.17 I thought about asking my service adviser if they would update it but I'm kind of afraid to do so because my radio has worked flawlessly since the install none of the bugs that others have talked about.

Do you happen to remember what PIN number was in your harness? My mirrors will be here Thursday but I think there was a couple of members who wanted an alternative to buying the new mirrors. Some just wanted to replace the glass in there existing mirrors. Thanks in advance you are a great asset...

Correct it causes a code and disables blind spot completely.

Just wanted to chime in on this I added this to my truck before my mirrors arrived and I set the Doors-Blindspot Mirror Present with Alfaobd. While testing the system I got a warning light on my Evic (Blind Spot Monitor Temporarily Unavailable). System wouldn't work. Turned the mirrors present...

FYI your radio module is new it won't have a MSISDN number. If you're looking to active the WIFI Service you will have to go to your local dealer and hopefully they will assign your radio one. Be nice to your service adviser 😉💵 he's your middle man to the technician.

It depends on what firmware your bcm was flashed with from the factory you should be able to find your hardware version with alfa. Jimmy07 has an example of a working one and I have an example of one that didn't work. Read about a page back.

I came from a 2019 1500 Lone Star 8.4 non Nav. The issue happens in the non Nav trucks and the firmware they flash on those BCMs. At first Jimmy07 thought it was the radio itself be after I had the problem after the upgraded 12 inch screen we came to the conclusion that its tied to the firmware...

So for people looking to do this if your ECU hardware number is 68287182AH the cargo camera soft key will not show up when turn on with ALFA. There could be other hardware numbers that don’t work but this one is confirmed not to work. Thanks Jimmy07 for looking into for me. Glad I bought my...

Yes

682877182AH

Did you ever get yours to work?

yes I enabled with alfa and the soft key never showed up its been 24 hrs.