Search results

Mine had ramped up to about 55-60F off in the last few days, and today my right side turn signals went out. I’m sure hoping the two items are related. Bringing it in for the 4th attempt to fix this tomorrow.

Sorry Joe, I’m not familiar with the Rebel lower grill. If yours is an open mesh, there shouldn’t be any need to replace it. My lower grill on the Laramie was 100% blocking, so I could not leave it in place and see any light output... had to change to the diesel grill mesh which lets air in to...

Mine was off by 40F yesterday, which was enough to finally flag a CEL. I’m not sure how the system knew there was a sensor issue, however... as it’s been off by around 25F for nearly a year. Maybe it finally figured out I’m using seat heat and window defrost too much when it’s “70F” out?

I guess that depends what all they’re doing. Is the light bar already installed and they only need to prepare the wiring? 3hrs is probably too much. If they’re installing the light bar and wiring, 3hrs seems extremely reasonable. I am sure I have far more than 3hrs into creating the bracket...

I haven’t been fortunate enough to find a wiring diagram, and I still don’t know for sure which wire is the DRL. Haven’t had time to mess with it this week I read someone online say White with Green was the HI beam so figured it was something to go off of and just gave it a shot. Tapped into...

Thanks Finn, that’s an excellent question and I’m glad you asked it. Short answer is... kind of. My light bar has a low light DRL option that’s about the brightness of my phone screen. I do want to plug that into my DRL circuit because I like the look of it. That current consumption is only...

Update in case anyone else is looking for this information in the future: the HI beam wire on the drivers side is white with green stripe on the factory LED headlight harness. It was a PITA to get to, but I tapped into mine. I still need to decide how I’d like to operate my light bar DRL...

Update in case anyone else is looking for this information in the future: the HI beam wire on the drivers side is white with green stripe on the factory LED headlight harness. I still need to decide how I’d like to operate my light bar DRL functionality, whether I tie into the factory DRL or...

Does anyone have the wiring diagram for the drivers side LED headlight housing? I’m looking to tap into the high beam and DRL wires to control the two modes of my aftermarket LED light bar. I’m planning to use these two wires or fuse taps as inputs to trigger my relays.

Yep, super easy. The grill has two little sensor holders to hold the sensors. Those are just thin plastic parts which plug into the grill. So I installed the light bar back far enough to allow clearance for the sensor and wiring. It’s only a couple of wires that go into each sensor, so not a big...

Sure thing. Scroll up a couple of posts and you’ll see the mounting brackets I made. There are factory holes in the sheet metal part I connected to, so I didn’t make any modification to the vehicle. I just used 1-1/2” angle aluminum since it is stable and easy to come by. Since I don’t have a...

Nearly completed my 40” light bar install. Waiting on 2 little plastic parking sensor holders and I’ll be able to wrap this up. Looking forward to testing the light output tonight!

Got it installed, still waiting on the lower grill sensor ports, so I just taped my front sensors out of the way for the time being. Looking forward to getting this out tonight to see what “36k lumens” looks like!

Misery loves company, somewhat glad to see I’m not the only one. These other guys complaining about 2-5F inaccuracy don’t know how good they have it [emoji1787]

That’s for a 20” bar, correct? I’m mounting a 40” bar. Just received the light bar yesterday and did some rough fit checks. Hit the Home Depot and got to work on a mount for it. I’m about $20 into hardware, and looks like it will work out. Should have the grill mesh delivered today so hopefully...

Bought a 40” bar and factory grill mesh today. I’ll need to fab up my own mounts for it, but there appears to be plenty of room behind the grill. The adjustable foot mounts should be a lot easier to work with than attempting to reach the ends of the bar. Looking forward to getting it installed...

I installed a Tazer DT to program my fogs for always on whenever my factory fog switch is enabled. It was driving me bonkers that they only turned on while turning.

Thanks for that. Looks good! If you have any tips on mounting the 32” bar, I’m all ears. I’m driving a Laramie so have to find a good way to either relocate the parking sensors or just put the light bar behind the open grill mesh.

Are you suggesting the grill mesh reduced light output significantly on the 20” bar, or simply the difference between this 40” bar compared to the 20” bar behind mesh is the major difference. Hot dang that bumper and light kit looks great. I’ve taken enough measurements to know I can fit a...

Outstanding! Which 20” bar are you using here, and what’s your experience? I’m contemplating fabbing a 40” bar behind the lower grill mesh, but it sure would be a lot easier to go with the RC 20” bar mounts. Have you had any experience with those fog pods in a dense fog? I drove in a dense fog...