Search results

Just a heads up for those of you who have the aftermarket mirror glass with blind spot LED, they suck big foot. You can't see them during the day. I installed the OEM mirror glass on both sides, what a different. Now, I'm a happy camper.:giggle:

Ef****n problem solved. Bought 2 new Modules (68263397AE), brand new, never installed and they work fine. Ignition ON, Right and left Modules enabled, NO ERROR MESSAGE. Added blind spot mirrors, since I have them installed, NO ERROR MESSAGE. CSM 1 and CSM 3 enabled, all working fine. Apparently...

Here is all what I checked. If someone has any more ideas, feel free to throw them at me. Thanks.

Thank you for throwing out some suggestions to fix this problem. Sometimes, 4 eyes see more than 2. Ya, I have checked those pins. I used a multimeter and checked the 4 wires going from the IHS Hub all the way back to the modules, all good, no short. I can use alfaOBD and connect to the door...

I tried all of that already. When I start from scratch, I enable the right module first, no error. Then enable the left module, error comes up. Swapped modules, started again, same outcome. No mirrors enabled at all. Checked all the wiring on the left side, no problem found. Next, installed...

I have 2 new jumper harnesses and 2 new module coming. See where this goes. I checked all the wiring and everything is OK, even Jimmy is out of solutions. Will update when the new parts get here.

Have a look here. Good luck...

So, I did my retrofit of the Sensors into the OEM LED Lights, hocked the lights back up and all working as they should. Next step was adding the wires into X400 under the seat into position 39, 40, 41 and 42, run them up to the white bus under the kick panel and plugged them in 2 empty spots...

OK, took the BUICK out of it. Looks better.

So, after I installed the Rough Country fender flairs, i decided that they need some lights. After a long time looking for side markers, I found some from a 2008 Mini Cooper. They are a perfect fit in size and curvature. So, I mount them up and wired them into the OEM side marker lights. Also...

Tinted mine completely, plenty of light coming thru.

That is just an empty spot behind it. Some models I guess have the cargo camera installed.

Yes, they do. You have to cut out the fender for it to work. They don't just glue on.

You need to have your eyes checked....:cool:

Well, when you buy a TRX, they come with a hole in the fender for the vents. Just saying....

Just installed the Air Design fender vents. Came out great. love those things. Cut once, cry once.

So, here is my dilemma. I bought the pins from mouser, male 538-33000-0003-lp and female 538-33012-2002-lp. They do not fit in the yellow connector, they look like they are to big. Any inside of that? Thanks.

Here is the passenger side. XY420A Pin Circuit Wire Color Gauge/Size Function Option 1 F921 PK/YE 0.75 FUSED IGNITION 2 A907 RD/ 0.75 FUSED B(+) 3 F924 PK/YE 0.75 FUSED IGNITION 4 F507 GN/PK 0.75 LEFT FRONT SEAT BACK SUPPLY 5 F922 PK/YE 0.75 FUSED...

Have to look for it...

Because it's a Chinese knock off. Don't worry, I bought mine from Amazon and have it on for 2 years, not one single problem.