Search results

I have a 19 bighorn, anc module is under drivers seat, silver in color

I have a leveling kit with 20x10 -18 Fuel Rebel 6’s with 33x12.5 Falken Wildpeaks. Only rub a little in a hard reverse.

https://5thgenrams.com/community/threads/towing-payload-with-22-inch-tires.3973/

There is a thread about this already, from what i have seen is that it doesn’t have an effect. Towing/Payload with 22 Inch Tires

Could be your bed bolts/ bushings. Have heard this can be an issue

There is a white hook on each of the seat that you can remove a few inches off & they will be able to fold down.

Netaudio has plug and play harnesses

If you are looking for more of a “street” look i have heard good things about the Nitto 420v or the Toyo Proxes

Besides pucks, I haven’t seen an actual kit either.

Maybe it helps? I don’t know much about the Etorque.

Yes the led headlights will dim when the voltage is fluctuating high and low as the alternator is trying to keep the truck at the desired voltage. I have 2 10’s on a 1500 watt amp and when i first installed my system my lights dimmed a bit. Doing the big 3 will not hurt anything just be there incase

Besides upgrading battery & alternator, recommended a big 3 upgrade. Battery ground to chassis wire, the chassis to engine block wire, and the alternator plus to battery plus wire. 4 AWG or bigger

In the beginning the rake was very noticeable but now i think it leveled out pretty well

I did this same kit on a bighorn, the instructions are very clear and easy to follow, hardest time you will have is sliding them in. I recommend getting a prybar under the lower control arm to help you get them in place. Rides just about like factory. If you want a better ride many like the...

What height are the fox coilovers good for and do you have the off road package? I have a 2 inch level with 33s

I have a 2 inch level also and i am running a 33 x 12.5 also. My current set up is a 20x10 -18 and have little rubbing in hard reverse. My new set up will be a 20x12 -44 and it will do the same and rub a bit in reverse.

https://www.custombilletstore.net/product_p/3019.htm

I rub in reverse when doing a tight cut on a 2 inch level with 33x12.5

Sold