5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Thanks and question

Steve Polewski

New Member
Joined
Apr 30, 2025
Messages
2
Reaction score
1
Points
3
Age
52
Glad I found this.
I have a 2019 Ram 1500 5.7 Hemi.
Engine has been rebuilt at 74,500.
Truck will not start I have replaced every sensor pertaining to ETC and it still won't start. I'm completely lost on this. Of anyone has any ideas I would be glad to hear it.
 
Glad I found this.
I have a 2019 Ram 1500 5.7 Hemi.
Engine has been rebuilt at 74,500.
Truck will not start I have replaced every sensor pertaining to ETC and it still won't start. I'm completely lost on this. Of anyone has any ideas I would be glad to hear it.
Glad you are here! Welcome 🤪
I cant help much with the issue, but I'm sure if you asked this question in the proper section you get more help.
When you scan it does anything come up?
 
Glad I found this.
I have a 2019 Ram 1500 5.7 Hemi.
Engine has been rebuilt at 74,500.
Truck will not start I have replaced every sensor pertaining to ETC and it still won't start. I'm completely lost on this. Of anyone has any ideas I would be glad to hear it.
I think I'd start a list of stuff that you can verify working.
There is a flood of info you could also check using alphaobd or Jscan.
Like 1791 said fuel and spark need to be verified
Has this engine ever run? or did you have it rebuilt and it stopped running
 
Sorry just seeing this. The timing chain broke in October of 24. It was rebuilt in January and hasn't run since being rebuilt. It turns over but just won't run. Then just throws the service throttle control. I have replaced the crank sensor cam sensor map sensor and throttle body itself. Still no go. This has me completely stumped.
 

Users who are viewing this thread

Back
Top