Recent content by Yellotsacul

Has anyone found the part number for the new 12" uconnect 5 module so we can test it out to see if an upgrade is possible? Sent from my SM-N986U1 using Tapatalk

Rca to the auxiliary input Sent from my SM-N986U1 using Tapatalk

I did and it worked just fine. I activated it to use for a fire tv input and everything worked as it should. I believe I used the tazer to activate it however, not alpha. Sent from my iPhone using Tapatalk

Make sure you have drl dropout set to yes as well. Then when you use the turn signal the drl function will turn off while the blinker is activated. Not sure if that's your issue but that's how I have mine set up and it works with no errors. Sent from my SM-N986U1 using Tapatalk

Moes-performance.com. Matt is awesome and will get you all set up. Give him a call and he will make sure you get everything you need. Sent from my SM-N960U using Tapatalk

AlphaOBD is what you are looking for. Do a search and you'll find some good info on it. Sent from my SM-N960U using Tapatalk

Aftermarket muffler with outlets turned down just before the axle. Factory pipes with resonators are still there. Have a muffler shop connect the turndown to the rear pipes and you should be good. Looks like the muffler is probably a magnaflow too so it should sound pretty decent when it's all...

You can use a jailbroken iPhone or a rooted android to watch videos through CarPlay/AA. However, with iPhone, if you are wanting to use most popular apps these days (Netflix, Hulu and so on) you would have to be on iOS 10 or lower. iOS 11 and on, Apple has implemented drm protection that won’t...

All good. Glad you got it working! If you are talking about a harness for the plugs, I don't know of anyone that sells anything like that. Infotainment has one they make and use but they won't sell **** separately. Sent from my SM-N960U using Tapatalk

(This only applies to 8.4 nav. Non nav only has 1 plug and it has to be completely rewired) The hazard wire for the 8.4 nav is on the plug with blue tape that is now not used with the 12.1. You would have to run a jumper between the plugs to go from the white/dark blue (position 8 I believe) to...

Looks like it's just showing you instructions for installing on the durango/Cherokee. It says in the print it supports all fca vehicles 2018+. Yes you just need the bypass module, a bluetooth obd scanner (that's confirmed to work with the alpha program because not all of them do), and the alpha...

Here's the link for the Tazer DT. If you don't want the added features and cost you can just get the bypass module from z auto as well. I just happened to already have the Tazer. Tazer DT: https://www.zautomotive.com/product/tazer-dt/ Bypass module only...

I already had a tazer DT and used that as my bypass module. Sent from my SM-N960U using Tapatalk

I got my BAFX OBD2 scanner today ($23 on Amazon) and was able to get connected to Alpha OBD on my laptop. Made all the changes here that Njh3409 suggested and everything is working perfectly. I actually used the same module (68317978AH) with a different screen then he did (without the lane...

I will be attempting to make the changes this weekend once my wireless obd scanner shows up so I can connect to alpha obd on the computer. I have everything connected in the truck and am having the same issues as Njh3409 was having. Hopefully I can verify everything works in a second truck as...