Recent content by ws6guy

Thanks for the video! I did some more water testing. Again poured several glasses of water along the glass seal and the light seal, no leaks. Then I poured over the screws in the light and then it leaked. Screws are tight, probably too tight. I vaguely remember a slight cracking sound when...

yeah I think it's the shark fin this time. I poured several glasses of water around the window and no leak. Then moved on and poured several glasses around the brake light and no leak. Then moved on and poured around the shark fin but still no leak. However with the rake of the truck it's...

Well mine is leaking again. Got a leak in the middle directly above the slider and no visible cracks. Seems to be a small leak so far. The first time it leaked was in June 2023, fixed under bumper to bumper warranty by replacing the window. At that same time I replaced the stop light as well...

Yeah I'm not huge fan of how the smaller opening looks but "if" it fixes the leak issue then I'm all for it. When mine leaks again I'll take a closer look at this option or just say screw it and put in a non-slider.

what the little spot in the corner that's probably a reflection and not light shining through?

Here's a video of an aftermarket F150 style glass being installed on a Ram. Notice that where the glue goes there's no plastic frame. I believe the OEM has the plastic frame that extends to or close to the edge of the glass. So when the OEM one is installed the plastic frame is getting glued...

I highly doubt an F150 glass would fit the same opening as the ram without looking odd or being way off. I've seen posts either on here or Facebook that there's an aftermarket glass for the Ram that is the same style as the the F150. I don't think the aftermarket has the plastic bonded to the...

I put on Michelin Defender LTX in 305/45/22. Only have 3000 miles on them but they are very highly reviewed and seem great so far.

My 2021 with 42k miles has a little play as well. I thought about trying to grease it but figure the only proper way was to remove the shaft is to remove it and that's a hell of a lot of work for a band aid. I think this is covered under the 60k mile powertrain warranty so I plan on just...

4Play 4P06

Both look good on these trucks. I almost bought 20's but I think with my wheels the 22's look a little better. I was concerned going from factory 20's to 22's the ride quality would suffer but surprisingly enough I didn't notice a difference. Mostly because I stayed with standard P metric...

Yes it's stock height no level and it's a tight fit. The tires barely rubbed the front side of the wheel liner which was no big deal. Just heated up the liner and pushed it in a tiny amount at the spot of the rub. On the back side it's very close to rubbing. If you have mud flaps they'd...

Here's the poke that I have with 22x10 -18mm offset. Tires 305/45/22(33's)

Jumping in here on this. Do you all notice the torque converter locking up? On my last 2 trucks (4 speeds) you could tell when the torque converter locked up as it almost seemed like it was another gear when it locked. The only think I notice on the Ram is occasionally in 2nd or 3rd the RPM's...

Got some 4Play 4P06 22x10 with -18 offset put on today. Wrapped with 305/45/22 Michelin Defenders. Stock suspension and only a tiny bit of rub on the inner fender liner.