Recent content by Shawn84

They do not come with sensors or the stainless sensor mounts that screw into the light housing. But recon's lights on sale are cheaper to buy and get the sensors than it is to buy the OEMs with sensors. Sent from my SM-G981U using Tapatalk

If the plugs behind your taillights match the numbers in my previous post youre good on all outside wiring. If you look under your driver seat carpet at the wiring harness, look for those 4 wires previously mentioned. You'll most likely still have to install those from the seat to the side dash...

I can get my android version to work with my cheap BAFX Bluetooth adapter now. But my OBDLink EX USB still isn't working. I'm in an email chain with AlfaOBD about it. I need to send in a debug file for them to analyze.

Well still dealing with AlfaOBD about my OBDLink USB not working, thankfully I had an ELM Bluetooth adapter laying around to correct my BCM. Took a week to show up on my dash, but everything is working now. I used Recons new LED tailights designed for OEM blind spot monitoring. Those on 30%...

Anyone else having issues connecting your alfaOBD since this last update? Sent from my SM-G981U using Tapatalk

You know how things just go from one to another LOL So I searched through the forum and realized I still need to enable the turn signal drop out setting in alfaOBD. This project was blind spot monitoring and adding LED turn signals. But figures I can't alfaOBD to connect to the BCM now...

Sorry just edit/rewrote my reply Sent from my SM-G981U using Tapatalk

So I enabled it and drove up the highway with a 7x16 trailer hooked up. Nothing on the dash showed the trailer length. The setting in the radio is on auto. I'm also experiencing an issue with the passenger side tail light. The BSM always seems to think someone is there, and I'm getting tail...

Does it matter that that part number is listed for the 2500 and 3500? I only have a Ram 1500

Both my sensors are 68263397AE. What's considered 2020+?

In alfaOBD, what are "cust.set.menu 2: blind spot with trailer CSM present" and "cust.set.menu 3: trailer length blind spot enable/disable CSM present"? Should I enable these? I have an 8.4 nonnav console.

The "jumper wire" is a short harness that goes from the taillight plug to the main rear bumper harness. It's maybe 2' long. If you remove your tail lights the tag on the harness has 3 digits and 2 letter large under a QR code. They should be "220AD" for the driver side and "222AD" for the...

Wow...my stock halogen tailight ram has the right jumpers. 220AD for driver side.

I'll look again when I get home tonight, but my existing driver side jumper seemed to be populated all but 1, I'll check which pin then. My truck came with halogen tail lights. For those of use with what appears to be a full harness, is there any easy repin or change we can make to it vs...

Any idea yet on why that original harness didn't work? My trucks got all pins too with halogen tailights. Im still waiting on 1 more module to arrive to start assembly.