Recent content by SaftenZitronen

So I did what @Mr. Chow did and went in advanced mode/manual connect . 8502 twice. Clear faults .. etc. I got the 360 view to pop up . Started driving at around 3-4 mph. Clicked start.. nothing (failed or incorrect sequence) I feel like I’m getting closer but something is still stopping the...

Well let us know what they say! May be something that needs to be addressed .

Mine does that too, that may just be a safety feature that if you don’t have traction control AEB won’t work . (Maybe something about the tires needing traction control to stop correctly in an emergency )

Do you remember what options you turned on/off. It should just be cruise control off and type of ACC. I wiped it to factory when I continuously got errors, then I changed those two option ^^ and I had a automatic emergency braking error. All I did was turn off the vehicle and let it turn off...

You’re fine ! There’s a lot of threads to keep up with . I put it into f26, we will see if it kills my battery still. When it comes to the errors , I have no put the bypass cable in and tried it that way. The ECU connection error is gone but now it is spewing a (Failed. Conditions not correct...

Thank you, I’ll search the thread for the instructions. But hopefully 26 will do it .

Well. It’s ridiculous but I had a cord plugged into the wrong spot on the back of the radio. I’m a dumb a**, lol. I will switch it to f26 and see what happens .

Another update : cameras all have a visual now . But I’m still getting an odd ECU connection error . On another note, does anyone remember what fuse they put their harness into? Mine is in F27 (Mod Cluster CCN / Mod SGW) but I feel like it’s draining my battery .

If it was a power issue it wouldn’t let me connect to the CVPM correct ? Maybe my harness is faulty . I’m going to ask @Jimmy07

Update : all cameras installed, wires ran. CVPM installed. Still blue screen. Errors mention ECU communication issue/lost connection to each camera . They’re all connected all lines are intact . Not sure what to do at this point.

blue screen should go away with calibration? Cool, I was worried something was wrong . Spent all day tearing my grille off , don’t want to do it again to replace a cable or camera 😅

You need the correct ABS and HCU

Update : I have everything installed except for the two side mirrors (waiting on one more to arrive ) , I did the process in alfaobd but I am getting no image. It’s just a blue screen. Anyone have any ideas?

Okay, I verified that #6 3/8 screws work perfect for as the side mirror bracket fastener if you’re going the same route as me !

Appreciated! This is my plan, I have limited mirrors so it has heated/blindspot/dimming .. I’d rather keep those features so I’m going to drill a hole where they go and do it that way. It’s been pretty difficult to locate the fasteners . I found the brackets oem but they’re like 250 $, I ended...