Recent content by RickTech10

I will leave that decision to the professionals, but I would only do that as a last resort. The FCW Light is expected as part of the procedure. The Mopar online parts site shows you what parts are interchangeable as far as the last 2 digits. The ABS Module and HCU’s that I installed were not...

Can you tell what all config changes to make. I made the following and still get the errors VehConfig 1: PTS Configuration- Semi Automatic VehConfig 5: Semi Automatic Parking System Present- Yes Parktronics: Park Assist Tuning Set- Base 1/4 Channel/Sahara

Yes, that’s the module on the left kick panel on teh drivers side, right?

Thanks Vincent, I got the parts in and installed them. I did the rear harness with the outer sensors and the new module. I already have the 6 sensors in the front. I got the new harness and additional sensors installed. Before I made any of the config changes, I got the ParkSense Unavailable...

Can you tell us what codes are set right now? I know when I got the warning light in the top left, I had a component activated but not installed. I also got this when I activated rain sensing wipers with the wrong module installed. It’s basically saying the BCM is receiving bad information or...

Thank you MannyN and Vincentw56 for the information, I really appreciate it. Once I get all the parts installed, can someone tell me what all needs changed in the configs? I have alfaobd to make the changes. Thanks again!

I have successfully completed the process of adding the full Advanced Safety Package to my truck and it works great!! Thanks to all that have contributed on this message blog. My next project is to add the ParkSense Active Park Assist since my new center stack already has the button for it...

Can you repost the information on this, I am unable to find it in the previous posts. Thanks,

Have you chatted with Jimmy07 lately, I messaged him, but have not gotten a response. Didn't know if he was still active on these forums. Thanks,

Thank you for the detailed instructions on adding these features to a RAM 1500. I have everything I need to start the process except the wiring harness that goes from the rearview mirror to the CANBUS under the dash. I know you have instructions on building a harness, but I would like to buy...

I am looking to add adaptive cruise to my 2020 RAM Bighorn, can you tell me if you already had the wiring harness from the rearview mirror down to the CANBUS?

Hi Jimmy, I have a 2020 RAM 1500 bighorn that I am looking to add the adaptive cruise to. I don't really need the lane keep assist, but can add it if it's all part of the package. I have the DASM to add and the brake modules. The only part I am missing is the wiring harness that goes from the...