5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Richard320's latest activity

  • Richard320
    Richard320 replied to the thread Changing Fuel Octane.
    It probably will only take one drive cycle to adjust the base timing. Which is in general terms, a cold start, warm up to operating...
  • Richard320
    I'd look for a cracked, plugged, or pinched line to the MAP sensor for that code. The pedal position sensor is probably the one that...
  • Richard320
    Richard320 replied to the thread Battery blanket confirmation.
    I went with a NAPA battery. Just plug that Mopar part number into google, select the shopping tab, and go wth the cheapest. That's what...
  • Richard320
    Richard320 replied to the thread Mods.
    These are Mods. :LOL: https://rarehistoricalphotos.com/mods-vs-rockers/
    • 1713923647855.png
  • Richard320
    Richard320 replied to the thread Jerking during acceleration?.
    Under load could be spark plug, a coil, or even the boot on the coil. I'm surprised it hasn't set off the check engone light and a code yet.
  • Richard320
    Richard320 replied to the thread what s this ETC warning light.
    It's normal to light up as a bulb check on startup. It lasts a little longer than you'd want, but as long as it goes out, you're fine.
  • Richard320
    Richard320 replied to the thread Dinner tonight.
    I always think of this when I read gumbo
  • Richard320
    We bought this Prime Rib in anticipation of Christmas, but it didn;t get used so it's been taking up a bit of freezer space. So today it...
    • 20240408_154525.jpg
  • Richard320
    Richard320 replied to the thread Is my truck lifted?.
    I'd say the answer is probably. The difference in diameter between your tires and the stock 275/65R18s is about 3" 1½" on the lower...
Top