Recent content by Ramhighflyer

Ran power from the fusebox in the drivers foot well to the rear seats, along the door sills … there is a large bundle running there already that I followed….fuse spot was actually was marked rear seat heat(or something similar)I think there was even a left/right…. i did pull power from the...

I ended up just installing some after market seat heaters in the rear seats like $60-70 a piece … put the switches for them in the center console , beside the rear USB ports… looks factory… only thing it does not do is the switches do not light up at night… Installation was a “process” but took...

I just took mine to the dealer for a cracked left and right exhaust manifold.. I had them check the latest software availability for a 21 with a 8.4, non Nav UC4,.. apparently the software that the truck was delivered with in 10-2020 is still the latest version for that. I will see what the...

Idle control is 100% computer controlled, there has not been a ”upping your idle a bit” in 20 years……there is very little to nothing to “adjust” on a modern engine

Did you bypass the security module?

Thanks for that picture.. was worried that the normal reverse picture would get so small that it be hard to see… but it looks like it be doable….. time to start gathering parts….

Thanks for that advice… will look into fox 2.0 or 2.5……

Agreed with the no spacers etc…. Was looking at Icon and similar systems, not as much worried about that kind of money, but that kind of system seems to be more for off road applications, logically so…. I am trying to make this thing ride like a Cadillac with a 2 inch lift …. Switch to 18 inch...

without trying to hijack someone else’s tread, but there seems to be a lot of good information on here….but what would the recommendation be for a 2 inch lift kit that would not deteriorate/maybe even make better the factory ride ? 99% road/highway…

^^^^^^^I did see that in my search, and figured it was a misprint/don’t want to sell it / whatever price…. No one in their right mind, unless you are in aviation, would pay that …

Waiting to hear back from member St-na … will take you up on your offer if needed …. Plan is NOT to make any money with this, just cover expenses, for the good of car lovers/tinkerers/people everywhere….with the new trucks coming out, and used mirrors becoming more plentiful, and disassembly of...

I will send you a pm… i will take them…..

Going to do some looking around here and see if I can find a pair in a salvage yard….with camera’s, that might be the most reasonable way to go about it… new camera’s are $200+.. will follow up

Did not know if they were “mirror “ 😬image of each other , due to angles of the mirror etc…. I will see if I can get a hold of a bracket and proceed from there…..

Now that is something we can do!! i have access to scanning and printing capability….. do we know if left and right are the same?