Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
👆 I think this is the issue. i never knew what year the TRX takeoffs were off of. but I suspect you are right. i think i am just going to have to bite the bullet and do new sensors
yeah Discount tire said they will replace them for $60/tire, and may just have to go that route. figured I would ask on here first if someone else had run into this
I have a 2021 Laramie, I found some TRX takeoffs, and installed them on my laramie. I am having issues getting the TPMS to work with my truck.
I have driven about 1000 miles with them and they still dont pick them up so I took it to discount tire today and he tried reading the TPMS sensors and...
Ok so here goes, i did a quick search but didnt see this specifically answered.
i have a 2021 laramie with air-ride. I am contemplating putting on the rough country leveling kit for the the air ride system...
so i cut my rails so they are fully cut around the bracket and allow the rails to go completely flush to the sides of the bed.
I did not have to drill anything out on th RO brackets, there is a large hole that THAT screw sits in allowing the brackets to sit flush.
as for your last question...
are you cutting the rails? i have had to make a cut similar to the cut that @enigmaaron did. also i will have to cut off about 1/4" from the end of the rail, since it now sits forward a bit more than it should due to the RO bracket
yeah i found that out. any chance you have pictures of the rails after you cut them? my rails are a bit different than the revovler rails enigmaaaron posted. it looks like i will have to cut off the end cap to the water "trough"(?) that the hose comes out of the bottom. in order for it to sit as...
thanks for this post! found someone on FB marketplace selling their mx4 for super cheap and going to order the RO brackets now. I am intrigued and will possibly test out drilling out the holes on the bracket, as you mentioned, to see if i can sandwhich the rail in there.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.