Recent content by Piotr_Rebel

My temporary spacer made from mini M&Ms tube. I'm planing to order my spacer with next batch of modifications..

If you push camera from behind it will pop-out, as bracket is only supporting it back side. Camera is not latched in that bracket.

Thanks for the photo. I've posted only what found in my mobile, but You are right, that simply checking rather lenses of the cameras are flush and paralel to the cover can confirm proper installation.

Sure, I can do it, but I'm abroad at this moment.

Are you sure your cameras with their brackets sitting properly in the mirror shell?

My CVPM is 56029964AF and is working fine for my '22. I do not have tow-mirrors.

I don't have my truck with me right now to check, but I have feeling that your side cameras viewing much more inboard and forward than mine. Edit: I've got photos from my wife, but it is dark outside now

Maybe somebody with Tow mirrors can confirm rather have same view from side cameras, as my cameras with non-tow mirrors looking straight down.

You can find tailgate handle factory painted with truck body color (there is separate part number for each color) 7KJ42KXJAA is Diamond Black Crystal. 7KJ42LAUAA is Granite Crystal Remember that you need additionally camera spacer for that handle (68529657AA). LED lamp need to be swapped from...

General sequence is same, but front grill is solid one piece, does not have seperate plinth for logo/camera, I think Rebel grill with camera does not exist. If you want to keep Rebel grill you need to DIY camera bracket (what I did) Other option is to replace complete Rebel grill with Limited...

Remember that you need different tailgate handle as camera is bigger. Also connector is different.

If you use jumper wire you'll need female-male cable as jumper is female-female. Camera and CVPM have male connectors so direct cable female-female is required.

Yes, that is what I've purchased. Z type is universal connector that matches all other types.

68416790AA CABLE. CAMERA. LEFT Why do we need 2 pcs for driver side? I believe on both sides cable originally has two parts.(but lengths are not equal) There should be connector in the hinge are between door and body. 68416798AA CABLE. CAMERA. REAR. Do we need to change cable for rear camera...

Yes, I've drilled only bottom of the mirror. There is no other cutting needed. Parts required are: - camera - camera bracket + screw - Fakra jumper cable P.S. If you get used mirrors with chrome covers you can replace them with black from your mirrors. (easy to remove and install after mirror...