Recent content by Nuseal

AH has the new gasket. Be sure and seal the screws by wrapping top third with butyl tape. Many dont do this and the screws DO leak if not sealed

Use non ammonia glass cleaner. Amazon has a super thin cleaning brush available for a couple of dollars to scrub the area. Then soak a paper towel with denatured alcohol and use a thin plastic squegee to push soaked towel in and slide paper towel using squeegee. Do this a couple of times. Then...

Third brake light is main issue. Remove factory gasket and clean all the way to plastic. Prep with denatured alcohol and run round 5/16 butyl tape around it. Heat on dash before pressing it in. All surfaces must be clean for this. Seal mounting screws with butyl tape top 1/3 of threads. Rear...

The newly updated 3rd brake light assembly has an updated gasket that works. Be sure to seal the 4 screws by wrapping butyl tape around the top 1/3 of threads . The sealant used in the tsb works great if the surface is prepped and cleaned first.

My work area is Northern Virginia . Fairfax Woodbridge Manassas if anyone needs help

I repair automotive water leaks for a living. The newest third brake assembly has an updated gasket that works and is now only 35.00 . The rear window should be sealed with the tsb adhesive that is out. If surface is prepped properly it works very well. Never see shark fin leaks. Fix it quick...