Recent content by neonguyRT

FYI for the Jimmy Harness The connector plugs and not the CVPM. The ground ring goes to the ground bolt near the CVPM. The rest of the harness routes over to the driver side. The fuse tap goes into F26, and the fuse that was originally in F26 goes into the open slot on the fuse tap. The green...

Once you do this, you should be able to at least see the front and rear cameras in the surround view display. You will now need to calibrate the surround view cameras. This is what you need the MX+ for. Plug in the MX+ using the SGW Bypass. You'll have to calibrate the cameras when you're done...

Found this, might be helpful to put it in the OP