Recent content by MrCuervoRacing

limited only... upgradable but expensize

https://www.yeti.com/en_US/drinkware/rambler-20-oz-tumbler/21071500283.html 20 oz rambler mag-slider

Was using a step bit. I thing i ended up @ 1/4

Fighting with having an accessible location for keys and walet without sliding the center constantly and still have phone access in the holder. So i added another set of detent holes between the fwd and mid position. Gives visual access to keys and wallet in the coin holder tray while...

post or link the video if you can. did you start in aero height or let it lower from normal

personally I like the system, lots of up sides compared to a standard stop/start off the starter and 12v battery, but don't be fooled into thinking they did this for the customer experience or benefit cost of ownership, and lots more things to cause problem. Simplicity is always less trouble...

unloaded..... 8th gear in Eco on 3.92 vs 8th gear on 3.21 non eco due to load. who wins.

Best thing ive seen said in quite a while... i will have to borrow that .

been reading thru a few threads and watching a few videos.... the conclusion i came to is, On trucks with both Air susp and Active front air Dam (unicorn trucks...I have one) its likely more efficient to run in Normal mode and let the air dam drop 2.5 inch vs running in Aero mode and drop the...

my Stop/Start is really really really smooth on my NON-E torque truck.... like it never shuts off, never ever. ;) no e-torque=no stop/start

that is the steering stop. perfectly normal.

just eyeballed it. kept the margin the same across from the seam... for the cost of them its not much risk/

factory air susp/ rear revel links. leveled almost...maintaining a mild rake still