Recent content by MoreOvalteenPlz

The Kenda R/T’s definitely hum over 45mph as well, but it’s not intolerable to me. Around 60 dB in the cab at 45mph, 65 dB at 70mph.

Approximately 500 miles on them so far. Ride is a bit rougher than the previous set (LT275/65R20 Cooper AT3 XLT's), but that was expected. The front and rear Bilstein's help out tremendously in the comfort department. They're noticeably louder, but not terrible by any means - around 65 dB in...

35x12.5R20LT Kenda Klever R/T’s, ICON rear springs and Bilstein 5160 rear shocks to match the 6112’s (circlip #8) up front.

x2 on tying into the trailer wiring harness. I used this adapter for the trailer wiring harness plug so I did not have to cut/splice any of the factory wiring. I also used this 5 pin plug so I did not have to cut into the 7 to 5 pin adapter harness.

See this post.

Nope. Wireless CarPlay was not integrated until Uconnect 5 on ‘22’s and newer. However, there are aftermarket USB dongles that are capable of providing Wireless CarPlay with UConnect 4. I use a Magic Box 2.0 and am pleased with its Wireless CarPlay capabilities.

Thanks! I got this one in particular from Home Depot, but it’s a generic design that can be found at many other retailers.

Replaced the 3/4” LED’s in my toolbox with a dual function model. In addition to the amber running light function, these also switch to white when triggered by the cargo lights.

Finally replaced the chrome tailgate badge

A Hellwig sway bar will help tremendously with the body roll/sway. I installed mine on the stiffest setting and it is a night/day difference from stock. I also replaced my stock ORG front shocks/springs with Bilstein 6112’s on their highest setting (circlip 8) and am very pleased with how they...

Rotated the tires and added 1/4” wheel spacers to get a little more gap between tire and UCA. These should let me clear 35x12.50R20LT’s for my next set with no issues. Although I’ve still got my eye on LT295/65R20’s…

Lookin’ sharp! Sounds like you’ve already been bitten by the mod bug. Welcome to the forum!

The visor lights are 28mm festoon style bulbs. I went with these from Diode Dynamics and have been very pleased with them. I originally tried some that had 3 SMD’s and they were much too bright for the visor location. These are a nice upgrade from stock without being blindingly bright. Going on...

Another option is disabling the signature lighting and setting the amber turn signals as the DRL location. This creates a unique look that really sticks out IMO.

The H8 will absolutely fit once you remove this small plastic spacer at the bottom of the battery tray. I recently upgraded to an Interstate H8 AGM myself.