Recent content by MF17

Didn't work on my 23 Limited

Sure can, see attached. The brackets fit perfect, but the gator does not fit once the rails are installed because the brackets push the rails in about 1/4 of an inch and there is no wiggle room with the Gator... It won't fit one side when the other is in at the bracket end of the bed.

I installed the brackets on a 2021 and the hole configuration is perfect. I had 0 issues happen with installing the screws etc. Problem I had is not with the hole configuration but with the fact that the brackets are too THINK and protrude to far into the bed.... this does not allow for the...

Yea I've seen that, The brackets would work well as long as they are thinner than the RightOnBrackets. - at least for the Gator tonneau It depends how thick the ones on the post from Mike are

I finally got around to try and install my RightOnBrackets on my 2021 1500 with MFG and the Gator FX Tonneau. The brackets aligned perfectly and had to very little playing it for the holes to align. I also used the flat head M8 screws from amazon that were posted here in the thread but.... When...

Thank you all for the feedback. I'm going to try this and test it and see. If not, I think I'm going to go to an electronics shop here in Charlotte and have them professionally install to the mirror/camera power with this mount...

I have the same question, I have the R3 When using the top 12v outlet since my truck is etorque, the radar stays on all the time. Is there a way to have this outlet turn off when the truck turns off?