Recent content by mesoavery

Those are the specs from the Wagoneer/Grand Wagoneer which are both optional 2wd/4wd. Drivetrain doesn't change the version. Wagoneer only gets the 420 version so we'll just have to see what versions we can get in the RAM.

It depends on the version of the hurricane. 420hp only requires regular. 

You are correct, there is a hole for the camera, but it is missing a required shroud. The factory camera will not just fit in this hole without it sadly. On my Laramie the camera screws into a shroud within the RAM front logo. Without the shroud you cannot use this grill if you have the factory...

Requires 2 parts. The main cup-holder Console: 5YE132X7AG and the bin it goes in: 6LY66TX7AA The original lower bin part isn't as deep as the limited. It's super easy to swap. Took me 10 min. A lot longer to wrap as I'm a novice and I took it all apart to make it easier.

Installed the Limited center console cup-holder and wrapped the covers in 3M Carbon Fiber to match the rest of my trim. Pretty happy with the results.

Here: https://www.ebay.com/itm/255060785450?hash=item3b62ceb92a:g:uiEAAOSwzk9g90O5 Took me around 45min to install for me. FYI, if you have front camera, at this point it won't work with this grill as its missing a camera shroud.

Sounds the same as Bluetooth IMO. It's great for local around town trips but for longer trip, went on a 1 1/2 trip using Google maps and streaming Audible, kills the phone battery and wireless charging can't keep up so a wired connection is best. I'll still keep for around town though.

Yes, used 3M vinyl wrap. Did the whole interior.

I ordered mine back on May 7th. Just got it yesterday.

Latest message from the seller

Finally got my AA Wireless in. Allows me to have Wireless Android Auto. I removed the screen and stuck the module here with some 3M tape if anyone else is interested in getting it out of the way/clean install. So far pretty happy with it, takes 30-40 sec for it to kick on.

Me either, but if they are the same as TRX though they will be a "standard size" so decals should become available.

Side facia panels were an absolute pain. Are the letters different than the OEM RAM lettering on the TRX? They look similar but you can tell these were almost 3d printed being that you have to 3m tape them in

Mine was the same, delayed a couple of days. Tracking numbers anymore are a suggestion

Zero adjustability. Everything is fixed mounted. I feel like they used some other camera/shroud but what IDK. OEM Laramie is a no go.