5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by Mattyhooks

  1. M

    Calibrate Electric Parking Brakes

    Good news! In preparation to take my truck to the dealer, I was removing the Security Gateway Bypass Harness needed to run AlfaOBD. When my truck was off, I pressed the EPB Switch just for the sake of it. And sure enough, I could hear the actuators engaging. I said whatever, and proceeded to...
  2. M

    Calibrate Electric Parking Brakes

    I have an appointment tomorrow. Hopefully they can fix without replacing the actuators or module...
  3. M

    Calibrate Electric Parking Brakes

    Here is what I can do and I finally was able to write it down and can reproduce. 1) Go into Uconnect settings and activate brake service, I hear both actuators whining. 2) In AlfaOBD apply the left actuator, apply the right actuator, I hear both whining noises. 3) Deactivate brake service...
  4. M

    Engine Troubles-rough idle

    After going back and forth with the dealership, I gave up and just live with it. They told me the likely cause is an Intermittent Misfire, but could never get it to reproduce enough to save a code or log. They also said that's what Hemi's do. I gave them my truck for 4 weeks and no result. I was...
  5. M

    Calibrate Electric Parking Brakes

    A few weeks ago I did the exact same thing you did... I misunderstood the reset instructions and hit the brake pedal and pulled the EPB switch. This caused the caliper pistons to eject out. I put them back in, but had so much trouble manually screwing them in, got super frustrated, and used a 12...
  6. M

    Engine Troubles-rough idle

    Hello, I am currently seeking some guidance or insight my truck. Problem- Rough idle at cold and warm start, in neutral, drive, pretty much all the time. RPMs typically start between 700-1500, then after a few seconds down to 500. Currently, shaking occurs at all RPMs. Sometimes it holds 700...
Top