What's new
By:
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by Limax

  1. L

    Rear taillight running/parking light problem

    Found the problem. Broken White/Gray wire between driver seat connector & rear end frame rail connector. Thanks
  2. L

    Rear taillight running/parking light problem

    Thanks kapinallinen2, , I got the diagrams printed out and it looks like there's one more connector point under the driver seat (XY400A) and then it plugs into the BCM with connector C6/F using pin 32 White/Gray wire. This will help me confirm if the wire is ok. Will report back.
  3. L

    eTorque Bearing Replacement, Fixed Grinding Noise

    Great writeup! Those bearings are: front 6305-2RS-C3 & rear 6003-2RS-C3 there are also two good videos on youtube with how to do it. My MGU is starting to make noise at 82k I quess I will have to do it on my own.
  4. L

    Rear taillight running/parking light problem

    Hello, Hoping someone could help me with this. I have a 2022 RAM 1500 Bighorn with standard taillights (not LED) my left running / parking light stopped working. I went to change the bulb but it turns out that there's no 12v one the pin. Brake light works fine so does the turn signal & reverse...
See more
Back
Top