Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
With a brand new CVPM, part #68318033AI, all cameras had an image but could not calibrate the front. I purchased a second new CVPM with the same part number and rear camera did not work, just a black image, and still could not calibrate the front camera. I returned it thinking it was a bad...
Finally got my project wrapped up!
Unfortunately, don't know the root cause of why two brand new CVPMs would not calibrate the front camera. I was able to send one back, but not the other. BAM Wholesale wants a dealer to diagnose the component since it is electrical, which would cost almost...
Front camera calibration still failing. Used a new cable and same result. Swapped front and rear cameras. Same result, front camera calibration failed and rear camera calibration successful. So I have ruled out the camera being the issue.
A new CVPM I ordered has a rear camera port that is...
What a frustrating experience! Got another CVPM to test with and the front camera still won't calibrate. Next step is to try a different front cable and probably camera as well.
First time seeing that doc. If I'm reading it correctly, I could be looking at an issue with the harness or a bad CVPM. I will inspect the harness, got it from Jimmy, then go from there.
Tried individual camera, all worked except the front. Try only camera not calibrated, front still fails. Also tried to force all and still fails on the front. Cleared all codes last night and let it sit overnight and tried again this morning, still fails on the front. The only code showing is...
Here's both front view images. I tried calibration with both '20 & '21 in the BSM. Just can't pinpoint why the front is the only one failing and the rear is missing the grid lines. Starting to think there's an issue with the CVPM, which was ordered new.
On my '21 I had to change the model year to '20 for the soft keys. Still no luck on the calibration and also noticed no grid lines on the backup cam. Anyone know if there's a way to reset the CVPM?
Thanks, tried that but same result. Going as slow as 3 mph and as fast as 8 mph, still fails. Sometimes after the fail it flashes the 360 image for a split second then disappears. So close, but no luck.
Getting close. Everything is installed. I can see the front and rear cameras, but the surround image is still black around the truck. Calibration was completed on the rear, left, and right cameras, but continues to fail on the front. Any tips?
Thx, Bam has it available so I placed the order. I think I have everything ordered now. I will build the harness myself. Now hopefully when it all arrives, I will have time to work on it.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.