5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Recent content by ds28

  1. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    after replacing the 2 harnesses I now have the Blind Spot Monitoring system and Rambox working as they should for the first time in several years.
  2. D

    Melted rambox harness

    appears all of my problems are coming from corroded wires, connectors, harnesses, junctions. I am replacing 2 harnesses and hoping that works.
  3. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    Well I am going to get a few new harnesses and hope this works. Some of the wires are so bad they are not even connected anymore. I am only going back to the main wire bus even though you can see there is corrosion coming off that pig tail too. Parts I am buying: 68488850AB , 68365711AB
  4. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    posting this here to keep all related info in the same thread. TSB23-012-21 NOTE: This bulletin applies to vehicles built on or after August 01, 2020 (MDH 0801XX) and on or before November 19, 2020 (MDH 1119XX) equipped with the Rambox Cargo Management System (Sales Code XB9). SUBJECT: Driver...
  5. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    I reported both the Rambox and Blind Spot detection issues to the dealership while under warranty, but they were never able to find anything, and now Im at 81000.
  6. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    Here is the connector to the drivers ram box, I am guessing this is part of the circuit that goes to the taillight, causing loss in voltage due to corruption.
  7. D

    Melted rambox harness

    Did you find a solution? I have the same issue , no voltage to the actuator.
  8. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    and my drivers side Rambox pops open randomly still. I usually disconnect the wire so I have to use the key to get in. Maybe related as I’m seeing water/corrosion is common here. It’s a 2020 Ram.
  9. D

    Blind spot monitor stopped working / Rambox problems also [SOLVED]

    Update: I am going to edit this first post to say the Rambox and the Blind Spot Monitor issues are related on my 2020 Bighorn Ram. They were both caused by corroded wire connections. I live in PA and snow and rain kick off the tires into this area with the rear harnesses. Note, these are both...
  10. D

    Rambox pops open

    If there is a reference to this alert, I would like to show it to my dealership. My drivers Rambox pops open sometimes within seconds after I get out, sometimes it is around 90 seconds. It doesn't happen all the time and is not repeatable so the dealership couldnt reproduce the problem. It...
Back
Top