Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
I have a 2021 longhorn that I blacked out all chrome. I just removed chrome pieces and sandblasted with a fine silica sand . It looked frosted when i finished. Took it up to auto body shop for painting. Still looking good after ~ 1.5 years. The mirror cap was a pita.
The length was shortened 1/2 to 3/4 inch on front, plus the sweep angle on the sides and at the back are different, also the radius at the back of the hood had to be filled in.slight modification on fenders at the back as well as moving the fenders in slightly. Requires some welding on the...
As far as the 4x4 shifter buttons I didn't have to use alphaobd or anything else. Mine works as advertised. I can't remember if the dash plugs all plugged in or not if not I might have gotten a plug and moved pins according to color and position on schematic, sorry I can't remember well but it's...
I'm using my console shifter for p r n d only. Still using the limiter switch on the steering wheel. I like it there although I did consider enabling the limiter function on the console shifter. I don't know offhand the procedure to do so. For what I've done so far it didn't require any...
Mine is not etorque so I have an extra non used button for start - stop disengage. If the gt can be ordered without etorque that would be the one to get . I didn't consider that function when I ordered the panel
I didn't document it. Yours should be much easier as the ft console already has the mount for the shifter. Wiring wasn't hard,,change pin position on a couple of wires.
It definitely wasn't a cheap mod but when I focus on a project I go OC about it. It was worth it to me as the feel and look of the shifter is miles above the rotary knob, even with the cheesy jewl look. No offense to those who like that sort of thing.
had to get the top bezel group,plus the front bezel that has the charger port openings in it. All the electronics transferred over. I did have to fab a mount under the shifter made or wood mounted to the floor of the console itself. You have to he able to have correct height and position in the...
I had to get the top bezel group,plus the front bezel that has the charger port openings in it. All the electronics transferred over. I did have to fab a mount under the shifter made or wood mounted to the floor of the console itself. You have to he able to have correct height and position in...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.