Recent content by Cesar592

The screen and module are for the UC4. If you're looking for the UC5 module and 12-inch screen, I can help you. Send me a PM.

Hey Jimmy, a while ago I changed my BCM to a 2022 and I was wondering which pin on the BCM connector the second DECKLID/LIFTGATE RELEASE DRIVER is positioned on. On a 2020, I've searched everywhere but haven't found anything. I have some pins to try and see if enabling the pin on the BCM works.

I want to add the one for the bed; I have everything but I could never get it to work.

Yes, it's working together with your CAN bus module.

Try making this change in AlfaOBD and see what happens.

I have my PRND working on a 2020 model with a 2022 BCM flash and a 2026 DT UC5 module for the maps in the cluster.

I've wanted to do this for a long time, you know that's all that's needed.

The 2025 module works but the screen won't work. I have a 2025 module in my 2022 and it works fine.

It's a Laramie with the off-road package

my pitch and roll They work on my 2020 without 23 bcm

On UC5 and with a 2023 BCM you can have ParkSense Base Cameras activation.

I have the u37D version software

The module will work but only if you configure it to powernet but the screen will not turn on you will need a 22-24

For the years 23-24 only 3.0 digital mirrors came out, even in 2025, but I still believe that the 21-22 model will work in 23-24.