5thGenRams Forums
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
BowersFJ's latest activity
-
BowersFJ reacted to riored4v's post in the thread How to: modify wheel wells for larger tires/Negative offsets with
Like.
Couple people have mentioned the bend method so I gave it shot. Bent the tab straight, then up. Drilled with a stepbit and then tossed... -
BowersFJ replied to the thread Bilstein 5100.This is a thread about Bilstein 5100 shocks …. You probably need tonlook elsewhere, or start a thread of your own Sent from my iPhone...
-
They need to replace the shock, no other damage thank goodness.
-
Exactly. The only way this can happen. Installer error.
-
BowersFJ replied to the thread Bilstein 5100.Didn’t have the snap ring properly seated in the groove, and the bottom spring seat doesn’t allow it to come out Sent from my iPhone...
-
BowersFJ replied to the thread Bilstein 5100.Like mentioned above, the 2024 shocks probably do fit, but they have not verified it yet, so they will not state that they do fit Sent...
-
Probably like most manuf until they confirm the fitment personally. Could very well be they haven’t gotten their hands on a 25 to verify...
-
BowersFJ replied to the thread Bilstein 5100.Call Bilstein Customer Service Sent from my iPhone using Tapatalk
-
Use the supplied perch. 4 is good. 5 is as high as Bilstein wants you to go on Rebels. The rear shocks play no part in lift. They can...
-
The ORP springs work just fine with 5100's. They are designed to work with up to 2 inches of lift and the ORP are only 1 inch.