Recent content by Babs

Led bar was not water proof. Can not get anything good for $23. Replaced with home made arderino nano board and hard wired to truck. Works better https://youtu.be/ACGlkcnjtVc Link to full video Sent from my iPhone using Tapatalk

It was Easy and cheap. I first attached a 3/4” x 1/8”aluminum flat bar under tailgate using self tapping screws 1” long in to plastic areas only. I used 1/4” spacers to allow a gap for tailgate wire. Then used this Curtis adapture for 5 wire connection I purchased cheap light from Amazon...

It was Easy and cheap. I first attached a 3/4” x 1/8”aluminum flat bar under tailgate using self tapping screws 1” long in to plastic areas only. I used 1/4” spacers to allow a gap for tailgate wire. Then used this Curtis adapture for 5 wire connection I purchased cheap light from Amazon...

It was Easy and cheap. I first attached a 3/4” x 1/8”aluminum flat bar under tailgate using self tapping screws 1” long in to plastic areas only. I used 1/4” spacers to allow a gap for tailgate wire. Then used this Curtis adapture for 5 wire connection I purchased cheap light from Amazon...

I bought 5050 led off eBay $9 Bought 1/4 double sided 3m trim tape from Amazon led tape does not hold light on well. Then connected them to light in foot well that come on with door light. There is a few post on how too. If you need more details just ask. I siliconed edges of light for added...

Installed the led tailgate brake light. It is a little tricky with the multifunction tailgate. Video of it working

https://youtu.be/Y0gmb9EqTLo Sent from my iPhone using Tapatalk Added led strip lights under the door Used door light under steering wheel for power

Today I installed a led strip in bed so I can see at night Sent from my iPhone using Tapatalk

I like this Idea of F31 and it is more my level of installation and you do not have to cut a wire. Has anyone had any luck with this ?

I am in the same spot any luck on how to connect Sent from my iPhone using Tapatalk

Hello, Can you show a picture of the iirc mounting clip or include link to purchase them. thanks Jeff

I am thinking of doing the same thing