Menu
What's new
By:
Filters
What's new
5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

Attaboy's latest activity

  • A
    Attaboy replied to the thread AT tire with low road noise..
    XLTs also weigh quite a bit more with the extra lugs etc. LTs and XLTs are excellent in snow/ice/rain. If you’re in the mud or driving...
  • A
    Attaboy replied to the thread AT tire with low road noise..
    Vote for Cooper AT3 LTs or XLTs here. Personally running the LTs
  • A
    Attaboy replied to the thread Practical upgrades.
    Hauled about 1,100-1200 lbs, so prob 1,500-1700 with me and the random stuff in the cab. I have Timbren rear SES installed with one...
  • A
    Attaboy replied to the thread Clunk no-more.
    I’m curious about removing the sway bar entirely and using the Timbren front SES kit they make for snow plow/heavy winch-style bumper...
  • A
    Attaboy replied to the thread Clunk no-more.
    Mine has been doing that since I hit 54,000 miles and I’ve tried Energy Suspension and Moog sway bar bushings. I just installed an OEM...
  • A
    Attaboy replied to the thread Clunk no-more.
    Installed a set of Energy Suspension sway bar bushings with the grease. No gaps between the outer edge of the bushings as seen with the...
  • A
    Attaboy replied to the thread Practical upgrades.
    Just hit 1,500 miles and so far so good. No noticeable changes in height so far. Only had a couple of trips with about 700 lbs in the...
  • A
    Attaboy replied to the thread Clunk no-more.
    Yeah. Probably just hit it with some emory cloth, rustoleum rust inhibitors/primer and a coat of paint.
  • A
    Attaboy replied to the thread Clunk no-more.
    Here’s what the Moogs look like (new) installed with the gap to the front; note the gap. The sway bar corrosion has worn through the...
    • 5584B592-F7AC-4DE4-80B4-6551442570A2.jpeg
  • A
    Attaboy replied to the thread Clunk no-more.
    I have the links for a level after installing set for a 2.2” lift 6112s. The leveled links are 2-2.5" Leveled Sway bar links 2019+ RAM...
  • A
    Attaboy replied to the thread Clunk no-more.
    I ran mine with the slot towards the rear and went through three sets of bushings (two from Energy Suspension ES and one Moog) within...
  • A
    Attaboy replied to the thread Clunk no-more.
    I reinstalled the Moog bushings with the slot towards the front last week. That eliminated all feedback through the steering wheel but...
  • A
    Attaboy replied to the thread Clunk no-more.
    Thanks, been busy too. I experimented with changing the sides and orientation of the sway bar bushing brackets and found one that...
  • A
    Attaboy replied to the thread Practical upgrades.
    I have a bit over 500 miles since the install; replaced the Suspensionmaxx stock links with their links for leveled pickups. They...
  • A
    Attaboy replied to the thread Clunk no-more.
    Do you have a link for these? I just put the extended Suspensionmaxx end links on which made a noticeable difference in reducing the...
Show older items
Top