Recent content by Alter Ego Trip

REW. Been using that program in my HT for years. It's what most people use when doing any sort of EQ work. Mic is UMIK-1. I've used the UMM-6 calibrated from CSL, with good results as well. Pretty much any USB mic with a calibration file will work. REW is a steep learning curve, but well...

Tune pretty much dialed in. I may add a front sub to the mix down the road as Rams have a nasty null in the crossover area right around the midbass. This is due to width of cab in relation to drivers seat. Not much you can do about it. Had to raise xover to 90 to get good sub to midbass phase...

It's really interesting to hear about the bottoming out issues with the Maxtrac. I'd say my MT fronts feel considerably stiffer than the OE. There is no way I could bottom or rub on the fender well. I went 1.5" drop on the front also. I have the ridetech kit, but am not going to bother...

1) I think most things would be a downgrade from the OE limited headlights. You don't see many aftermarket options for Limiteds for this reason alone 2) I would be very wary of Form lighting. I have Form lights and have a warranty issue with one of them. They don't bother holding stock back for...

Modified the dash pods. Was getting some cancelation from backwave. Will re measure and see how it does.

6.75 would be a huge waste of time IMO. That's not a sub, it's a midbass lol.

I run those too. Wish they were a bit slower.

Agreed. The biggest difference I noticed in the Hurricane was the midrange. The Hemi isn't a total dog, but requires it to be wound up pretty good before it starts making power. The 3.92's really help in this dept. The dyno chart confirms this, regardless of overall output. FI will put more...

The hemi has always been doggie imo. It really benefits from a tune.

It's no doubt stronger, but not night and day. The HO on the other hand. Yes please. Agreed, especially considering it's transferred through the same drivetrain. Gear ratios will also throw off numbers as well. I dynod my supercharged mustang a few different times over the years with tire/gear...

Remote start? :D I'm not sure how often you encounter toe issues? Unless you are lifting lowering/damaged a part, it really shouldn't move. I can't remember the last time I had to mess with toe during a normal alignment.

We've never had an issue with alignment. We don't hop in and out of the truck though either. Not sure why you'd need to?

Well the tires and wheels alone will skew the numbers on the Hemi. Also, were these done back to back. Temp and humidity differences will mess with numbers as well. No doubt the Hurricane will be a beast of a motor, especially when tuned; but stock for stock those numbers look a little...

2". There is no reason to disable it during alignment. Truck sits static on rack. No different than aligning a coil spring truck.