5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

A-TEAM's latest activity

  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    Thanks for all the info guys, im going to start with a flush and a new oem stat and go from there. Maybe grab a 190 tstat and be the...
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    Flow is the same pressure when open yes, but flow volume is increased due to the Tstat opening earlier in the heat cycle. So it will...
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    This is not true. When they are closed they flow very little and keep the coolant in the block via bypass ports. If they always flowed...
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    I do not think its an efficiency problem because it runs 200-210 when not towing. While towing a 6k camper, into the wind no less, i was...
  • A-TEAM
    A-TEAM replied to the thread 180 degree thermostat.
    Ok, well that was a productive conversation. Im thinking about putting a 190 thermostat in mine. (Maybe 180 but that seems to ruffle...
    • IMG_7617.jpeg
    • IMG_7620.png
  • A-TEAM
    A-TEAM replied to the thread Overheated?.
    Did you check the coolant reservoir level? Sounds like possibly a water pump.
  • A-TEAM
    Replaced the spark plugs. All 16 with new NGK. I was surprised NGK is what came out factory. I was expecting mopar. 82k and 3500 hours...
  • A-TEAM
    Im not 100% sure, but the other style screen is just 1 ribbon connector vs the 3 ribbon connectors mine has. The best bet is the pull...
  • A-TEAM
    Mechanics gloves, microfiber towels and grocery store bags (used for garbage)
  • A-TEAM
    Tools required, Phillips hand driver #2 and #1, small flat blade screw driver, moving blanket, masking tape (optional) Amazon link to...
  • A-TEAM
    This is a thread to share information on replacing the screen in a first model year uconnect 8.4 nav system. Mine was delaminating bad...
    • IMG_7433.jpeg
    • IMG_7434.jpeg
    • IMG_7435.jpeg
    • IMG_7437.jpeg
    • IMG_7438.jpeg
    • IMG_7439.jpeg
  • A-TEAM
    A-TEAM reacted to MurdaRam's post in the thread PARK SENSE/SERVICE SHIFTER CODES with Like Like.
    I changed the star connector over the weekend. I can confirm it did solve my Parksense temporarily unavailable issue I’ve had for over a...
  • A-TEAM
    A-TEAM replied to the thread PARK SENSE/SERVICE SHIFTER CODES.
    Well the new star connector showed up but my front sensor issue seems to have cleared itself up after a deep clean / front scrub...
  • A-TEAM
    A-TEAM replied to the thread PARK SENSE/SERVICE SHIFTER CODES.
    I just started having the service parking sensors / front sensors unavailable message last week, every time I start and shift to...
  • A-TEAM
    A-TEAM reacted to JD in Tucson's post in the thread PARK SENSE/SERVICE SHIFTER CODES with Like Like.
    Big props and thanks to all who figured out replacing the CAN BUS-CONNECTOR. Replacing the part was very easy. Here are the steps I took...
Back
Top