Recent content by 23RamBH

That is exactly what my problem was. The Yellow seat connector had all the correct wires. The B+ & Grnd weren't actually connected to anything though 🙄. Once properly connected, everything worked! 🎉

I cannot thank you enough. I chased this down. Neither the black nor the red were attached to the truck. Its like they used a lower level IP harness and the upper level accessory harness for the seats. I have it all working!!!!! As soon as I connected the B12+ (red wire upper right) to the...

Run position - I know the seat heater works, my wife had it on last weekend. Might be able to call that good, unless you think I need to check it. Your Prior message was extremely helpful! If Pin 30 under the console is not populated - do I need to secure a relayed B+ wire to that location...

Correct - which is odd. All 4 lumbar adjustments work. Forward / Backward - Recline and the front seat tilt do not. My original seat was heated cloth with manual adjustments only. I did try with the ignition powered and unpowered - neither the pink wire in the lower right, or the bigger red...

Thanks for the reply! I ran to the shop quick. My plug looks to have a few more wires - however, the three we are looking for, appear to be present. I tested the big red wire on the driver side with a trouble light, and it lit up. I do not get the same result on the passenger side. The pink wire...

This was a great post! I have a semi related topic and since this one deals a lot with wiring and pinning, I'm going to tack on here. I have a 2023 Ram BigHorn Level B equipment group (Heated Steering wheel & seats, Power driver seat). Threads here on the forum suggests that swapping seats in...

Adding on to this post, I'm in a similar position as one of the thread originators. Traded my 2014 Ram 1500 on a 2023 Ram 1500 in early fall. I do not like the tow mirrors, at all. I want to replace those with a non-towing design. Has anyone had experience with aftermarket mirrors through...