**UPDATED** 2-22-23
I spent a little too much time researching the parts for the skid plate for the 33 gallon tank, so I thought I'd share here, including hardware alternatives at Menards (or any home improvement store).
Fair disclaimer, my parts haven't shown up yet, but I'll update this post if I find that anything is incorrect.
Link to schematic with part numbers:
Fuel Tank for 2022 Ram 1500 | My Mopar Parts
Mopar Skid Plate for 33 gallon tank:
52029964AD
Mopar Skid plate bracket:
68303523AB
Mounting hardware:
Hex nut and washer (#19):
68065741AA
Quantity: 3
Nut size/pitch: M8x1.25 (with flange)
Alternative flange nut at Menards:
https://www.menards.com/main/hardwa...-nut-1-count/87273/p-1444440161335-c-8913.htm
M8 washers:
https://www.menards.com/main/hardwa...flat-washers/82585/p-1444440047422-c-8945.htm
Hex nut and washer (#17):
6104726AA
Quantity: 1
Nut size/pitch: M8x1.25 (no flange)
Alternative nut at Menards:
https://www.menards.com/main/hardwa...712-c-8915.htm?tid=5178697835050740829&ipos=3
Add an M8 washer from above.
Or, just get another M8 flange nut.
Hex head bolt (#20):
6104390AA
Quantity: 1
Bolt size/pitch: M8x1.25 x 35mm long
Alternative bolt at Menards:
https://www.menards.com/main/hardwa...flange-bolts/87278/p-1444440179543-c-8737.htm
Hex flange lock nut and retainer (#21):
06512090AA
Quantity: 1
Nut size/pitch: M8x1.25
Alternatives at Menards, either this nylon lock nut:
https://www.menards.com/main/hardwa...697-c-8919.htm?tid=9154254128397457038&ipos=5
or top lock nut:
https://www.menards.com/main/hardwa...805-c-8919.htm?tid=9154254128397457038&ipos=1
**note, neither of these alternatives have a flange, and it looks like the OEM nut has a flange. You could just use the nut with a washer or get the OEM nut, YMMV.
Hex head bolt and washer, mounting (#16):
6104416AA
Quantity: 1
**Updated** Bolt size/pitch: M8x1.25 x 35mm long
Alternative bolt at Menards:
https://www.menards.com/main/hardwa...flange-bolts/87278/p-1444440179543-c-8737.htm
Hex flange locking nut and retainer (#26):
06508646AA
Quantity: 1
**Updated** Nut size/pitch: M8x1.25
Alternatives at Menards, either this nylon lock nut:
https://www.menards.com/main/hardwa...697-c-8919.htm?tid=9154254128397457038&ipos=5
or top lock nut:
https://www.menards.com/main/hardwa...805-c-8919.htm?tid=9154254128397457038&ipos=1
**note, neither of these alternatives have a flange, and it looks like the OEM nut has a flange. You could just use the nut with a washer or get the OEM nut, YMMV.
Edit: you can get all the hardware from Belmetric. Here is my cart (I added some extra quantities...there is a $5 order minimum; use promo code FREEGAUGE21 for a free nut gauge):