Rough Country 2” Level w/ rear n3 shocks

[jfred320]

I’ve got 33x12.5x20s and they rub a little bit. I know I could trim/mold the plastic away but I also want the look that will come with a level.

I’m looking at getting the Rough Country 2” level kit (loaded struts) and the rear N3 shocks.

Will I need adjustable UCAs up front to correct the alignment?

I don’t want any crazy high lift kit. It’s just 2wd, but I also don’t want to compromise ride quality with a spacer up front.

Is this kit what I’m looking for?
(Link for confirmation

N3 Leveling Struts | 2 Inch | Loaded Strut | Ram 1500 (19-24)

2in Ram Front Leveling Strut Kit (19-21 Ram 1500)

www.roughcountry.com

I appreciate any advice, good or bad.

 

[Faunce76]

You won’t need the arms. They’re needed when you do a lift of 3.5” and up. You can use you factory rear shocks too unless you want to replace them.


Sent from my iPhone using Tapatalk

 

[Crawpapa]

FWIW…if you get Rough Country, you will sacrifice ride quality. These are the cheapest option for a reason.