5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

  • We have been battling an on and off issue with registration verification emails not being sent out with certain users. We have finally got the issue resolved so if you have tried registering for the site but have not received a verification email, just request another verification email when you log in and you should now receive it. If you still don't receive the verification email, send us an email at [email protected] and we will get it resolved for you. Thanks!

Ready Lift 2" Level to 3.5" Lift

whiteram222

New Member
Joined
Nov 17, 2020
Messages
1
Reaction score
0
I am running into an issue here. I have the 2" Ready Lift leveling kit installed on my 2019 Big Horn. After looking at their site the 3.5" suspension left kit includes the components of the leveling kit plus an additional 1.5" top hat spacer for the front and rear coil spacers with rear bump stop landing pads. Unfortunately Ready Lift only has the 1.5" top hat spacers but wont sell just the rear components. Right now my only solution is to buy the lift kit and re-sell the leveling kit componets on ebay. Before I got this route I wanted to see if anyone out there has ran into this issue and resloved it.
 

Attachments

  • Screen Shot 2021-04-08 at 3.30.31 PM.png
    Screen Shot 2021-04-08 at 3.30.31 PM.png
    211.6 KB · Views: 29
  • 69-1935_2019_1100.jpg
    69-1935_2019_1100.jpg
    27 KB · Views: 29

Bustedgrills

Active Member
Joined
Nov 1, 2020
Messages
39
Reaction score
17
I'm running the readylift 2" level kit(upper control arms and top hat spacer) then added bilstein 6112s on the 5th clip setting and icon 1.5" rear lift springs...overall gained 3.5" front & 1.5" rear lift
 

Wisco417

Member
Joined
Mar 9, 2019
Messages
14
Reaction score
6
Location
Onalaska, Wisconsin
I'm running the readylift 2" level kit(upper control arms and top hat spacer) then added bilstein 6112s on the 5th clip setting and icon 1.5" rear lift springs...overall gained 3.5" front & 1.5" rear lift
Would love to see a pic of this setup. Wanting to go a similar route as I already have the RL Leveling kit as well.
 

Sugar

Active Member
Joined
Oct 21, 2019
Messages
101
Reaction score
43
I also purchased the 2” kit and will be using 5100s and icon rear springs. Confirmed with readylift that the 2” kit is the same components as the 3.5 SST.
If you want the other rear pieces like the spacer or the bump stop extender, mopar pieces could be used. The parts are in the following attachment items N and D.
1618533275374.png
 

Bustedgrills

Active Member
Joined
Nov 1, 2020
Messages
39
Reaction score
17

Attachments

  • IMG_20210403_230457_838.jpg
    IMG_20210403_230457_838.jpg
    235.4 KB · Views: 103
  • IMG_20210331_111629_060.jpg
    IMG_20210331_111629_060.jpg
    273.5 KB · Views: 104

MadMater'

Active Member
Joined
Apr 3, 2021
Messages
42
Reaction score
21
I am running into an issue here. I have the 2" Ready Lift leveling kit installed on my 2019 Big Horn. After looking at their site the 3.5" suspension left kit includes the components of the leveling kit plus an additional 1.5" top hat spacer for the front and rear coil spacers with rear bump stop landing pads. Unfortunately Ready Lift only has the 1.5" top hat spacers but wont sell just the rear components. Right now my only solution is to buy the lift kit and re-sell the leveling kit componets on ebay. Before I got this route I wanted to see if anyone out there has ran into this issue and resloved it.
Where are you located? Anywhere near Maryland? I have a SST kit that I took the control arms from that’s I’d let go cheap.
 

Milks19Ram

Member
Joined
Jun 9, 2019
Messages
14
Reaction score
4
I also purchased the 2” kit and will be using 5100s and icon rear springs. Confirmed with readylift that the 2” kit is the same components as the 3.5 SST.
If you want the other rear pieces like the spacer or the bump stop extender, mopar pieces could be used. The parts are in the following attachment items N and D.
View attachment 89867
The rear spring spacer was discontinued the last time I tried ordering it.
 

Users who are viewing this thread

Top