5thGenRams Forums

Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!

RamBox Dividers - a better option!

Capt Joe

Active Member
Joined
Feb 6, 2019
Messages
145
Reaction score
200
Location
Montgomery County, PA
So, I didn't like the Mopar dividers for the Rambox and certainly didn't like the price. I went into the design studio and set about to make a few panels to carve out on my CNC machine then a few custom designed hooks to print out on my 3d printer.

20190312_204333.jpg 20190312_204457.jpg

Gotta love some good measurements, because they fit great and went together perfectly. I designed the hooks to be removeable and configureable into any of the slots I designed into the dividers. Here are the finished dividers

20190312_204826.jpg 20190312_204256.jpg 20190312_182729.jpg up 20190312_153616.jpg 20190312_204836.jpg
 
Last edited:

Ellisstrong

Spends too much time on here
Joined
Sep 18, 2018
Messages
2,075
Reaction score
1,165
Location
Atlanta Ga area
So, I didn't like the Mopar dividers for the Rambox and certainly didn't like the price. I went into the design studio and set about to make a few panels to carve out on my CNC machine the a few designed hooks to print out on my 3d printer.

View attachment 18770 View attachment 18771

Gotta love some good measurements, because they fit great and went together perfectly. I designed the hooks to be removeable and configureable into any of the slots I designed into the dividers. Here are the finished dividers

View attachment 18772 View attachment 18774 View attachment 18775 up View attachment 18776
I like, are you selling any?
 

RAMRhode

Active Member
Joined
Jan 17, 2019
Messages
162
Reaction score
127
Those are fantastic! Definitely would like to order a couple of sets from you.
 

riccnick

Ram Guru
Joined
Jul 16, 2018
Messages
1,103
Reaction score
986
Location
Southwest Florida
So, I didn't like the Mopar dividers for the Rambox and certainly didn't like the price. I went into the design studio and set about to make a few panels to carve out on my CNC machine then a few custom designed hooks to print out on my 3d printer.

View attachment 18770 View attachment 18771

Gotta love some good measurements, because they fit great and went together perfectly. I designed the hooks to be removeable and configureable into any of the slots I designed into the dividers. Here are the finished dividers

View attachment 18772 View attachment 18774 View attachment 18775 up View attachment 18776
That's slick! What cad/cam software are you using?
 

RNB

Member
Joined
Oct 12, 2018
Messages
22
Reaction score
3
Look great wish you made them to buy a set in a flash
 

syddog 2000

Well-Known Member
Joined
Sep 3, 2018
Messages
397
Reaction score
295
I love seeing folks put ideas into motion. Its one thing to have tecnology its another to harness it and put it to use. Great Job! If I had ram boxes I would be onboard.
 

ders0

Active Member
Joined
Dec 11, 2018
Messages
73
Reaction score
40
... I'm going to make a few up and ask some guys to test them out at cost then tweak the design a bit. So far, they work really well.

Awesome. Really cool idea and excecution.

One question: Did you have a specific application in mind for those rectangular slots that are cut into the dividers against the back wall of the ram box? What do you use those for?
 

Capt Joe

Active Member
Joined
Feb 6, 2019
Messages
145
Reaction score
200
Location
Montgomery County, PA
Awesome. Really cool idea and excecution.

One question: Did you have a specific application in mind for those rectangular slots that are cut into the dividers against the back wall of the ram box? What do you use those for?

The rectangular slots were to fit over the Rambox logo in the box...but my in my new design the divider sits lower and they wont exist.
 

Capt Joe

Active Member
Joined
Feb 6, 2019
Messages
145
Reaction score
200
Location
Montgomery County, PA
I’ll demo a set as well. What’s the cost?

I'm thinking i'll do a about 5 to 10 sets of 2 dividers for testing purposes. Probably about $30 plus shipping. I need to order more HPDE that will take a week or two then I have to carve them. So, in about 3 to 4 weeks I should have a bunch of testers ready.
 

Ellisstrong

Spends too much time on here
Joined
Sep 18, 2018
Messages
2,075
Reaction score
1,165
Location
Atlanta Ga area
I'm thinking i'll do a about 5 to 10 sets of 2 dividers for testing purposes. Probably about $30 plus shipping. I need to order more HPDE that will take a week or two then I have to carve them. So, in about 3 to 4 weeks I should have a bunch of testers ready.
Sign me up as well!
 

WasatchBack

Well-Known Member
Joined
Sep 26, 2018
Messages
224
Reaction score
104
Very cool!!! This is the kind of stuff you NEVER see on the German car forums. Imagine that :-/
 

Users who are viewing this thread

Top